On this screen you can see if your detector has detected a leak.
- Check the detection status: You can see if the detector has detected a leak.
Tips:
If you want to automate some actions in case a leak is detected, you can add the detector to a scenario. For example you can program a notification on your phone if a leak is detected.
If you want to have a shortcut to your leak detector you can configure it in the "My security" card in the home page. So you can quickly see the detection status and take the necessary actions in case a leak is detected.
The history screen allows you to view your object's activity.
Related articles :
- Connected 3-in-1 motion, temperature and light detector
- Connected 3-in-1 Opening, Temperature and Brightness Detector
- Smoke detector
- Use a Door / Window Opening Detector - Lexman
- Using a 4-in-1 sensor (temperature, humidity, movement, opening)
- Using a leak, temperature and humidity sensor
- Using a Lexman leak detector with Enki
- Using a Lexman opening and vibration detector
- Using a motion detector
- Using a temperature and humidity sensor