This screen allows you to control and monitor the usage of your Lexman charging station. Here is what you can do on this page:
- Start or stop your station:
- Press the power button to start or stop charging your car using the charging station.
- Create a schedule:
- Click on the card and enter a start time and an end time for your schedule, then save. Your schedule is now created and a toggle allows you to activate or deactivate it.
- When your schedule is active, your terminal will light up every day during the time slot you have defined.
- Disable a schedule:
- When you disable your schedule, the defined time slot is kept in memory.
- Note that disabling your schedule causes your device to restart. The restart can take up to 2 minutes.
- View the execution history:
- You can see past events and track the activity of your terminal.
Tip: You can use scenarios to automate the start and stop of charging. For example, you can start charging your car only during off-peak hours to save energy.
Colors of the station's LEDs:
Station status:
- Solid green: Station connected
- Yellow flashing: Station is rebooting
- Red: Problem, contact support
Loading status:
- Blue vertical movement: Charging in progress
- Green + blue dot: Plug connected, waiting for your signal to start charging
- Solid green: Vehicle fully charged
Resetting the charging station:
- If you want to reset the station, the procedure is done at the meter. Wait until the LED on the object is completely off. This can take up to 2 minutes.