Prerequisites for installation and use:
- Enki * application + Enki Box or Enki Connect / Essentiel b Connect Box
* Prerequisites for the Enki application: Internet access and a telephone with a minimum operating system: Android: 7 / iOS: 15
Communication protocol:
- Zigbee
Country available:
- France**
- Spain
- Italy
- Poland
- Portugal
**Essentiel b Connect Box available in France only
Status feedback available :
- Yes
Alexa voice control :
- No
Google Home voice control :
- No
Article content:
-
Technical description
-
Product feature in the ENKI application
-
Product view
-
How to reset my object?
-
Technical documents / user manual
Technical description:
- Type: Connected indoor siren
- Requires the Enki box: Yes / Enki V1 box - Enki Connect box
- Status feedback: Yes
- Radio protocol: Zigbee
- Radio frequency: 2405-2480 MHz
- Maximum radio power: 20 dBm
- Operating temperature: 0 to 40°C
- Operating humidity: Up to 85% without condensation
- Storage temperature: -20 to 60°C
- Dimensions: 82.55 mm x 82.55 mm x 50 mm
-
Indicator light:
- Red: Power
- Blue: Network
- Green: Battery
- Volume of the alarm: 85 dB at 1m.
- Duration of the alarm: 3 min
- Mounting: Wall or ceiling mounting via double-sided adhesive tape, screws or placed on furniture.
-
Power supply:
- Input 100 - 240V~50/60 Hz
- Output: 5V / 1.0 A
- Cable length: 1.8 m
- Backup battery: Supports 12 hours on standby or 30 min in alarm mode.
Product functionality in the ENKI application:
| Functionality of the object | Properties | Integration in a scenario | ||
| Actions | Triggers | Conditions | ||
| Activate / Deactivate |
ON - OFF function of the object |
✔ | ✔ | - |
| Check the battery health status |
Notification in case of low battery |
✘ | ✔ | - |
Product view:
What does the status of the indoor siren LEDs mean:
|
Not connected Factory status |
Connecting Pairing signal detected |
Connected Functional power supply Backup battery active |
Connected Functional power supply Inactive backup battery |
Connected Non-functional power supply Active backup battery |
How to reset my object?