Prerequisites for installation and use:
- Enki App* + Enki Box or Enki Connect Box / Essentiel b Connect Box
* Prerequisites for the Enki app: Internet access and a phone with minimum operating system: Android: 7 / iOS: 15
Communication protocol:
- Zigbee
Available countries:
- France**
**Essentiel b Connect Box available only in France
State feedback available:
- Yes
Alexa voice control:
- Not directly, but possible via manual scenarios
Google Home voice control:
- Not directly, but possible via manual scenarios
Article content:
Technical description
Product functionality in the ENKI application
Product view
What does the radiator screen status mean?
How to calibrate my radiator?
How to reset my device?
Technical documents / user manual
Technical description:
- Type: Electric heating (750, 1000, 1500 or 2000W)
- Requires Enki box: Yes / ENKI Box V1 - ENKI Connect Box (Since version 1.23.2)
- State feedback: Yes
- Model: PVA-029 board
- Hardware: Rev. 0
- Power: 10 dBm
- Transmission: from 2.4 GHz to 2.485 GHz
- Protocol: Zigbee
- Operating temperature range: 0°C to +40°C
- Device powered by: 230 V
-
Description:
- Aluminum cast radiator with curved elements
- High-performance fluid inertia device
- Anti-corrosion protection by high-resistance electrophoresis
- Very long-lasting epoxy paint, uniform on all radiator surfaces, welds without excess thickness
- Perfect safety thanks to thermal limiter
- Each device is inspected at 14 manufacturing stages
- Made in France
- Wall projection: 148 mm
-
Control:
- Ultra-precise ambient thermostat to 1/10th of a degree
- Backlit digital LCD display
- 1 free program and 5 pre-recorded programs
- Presence detection
- Window open/close detector
- Digital consumption indicator
- Parental lock system
- Centralized scheduling via 6-order pilot wire
- Low standby power consumption (0.5 W)
Product functionality in the ENKI application:
| Device functionality | Properties | Integration in a scenario | ||
| Actions | Triggers | Conditions | ||
| Change the thermostat target temperature | Min: 7° / Max: 30° / Step: 0.5° | ✔ | ✘ | ✘ |
| Create an override | Temporarily change the equipment temperature for a given time when it is in a program | ✘ | ✘ | ✘ |
| Scheduling | Via the heating menu or unitary via the control card | ✘ | ✘ | ✘ |
|
|
|
| Control page | Settings |
Product view:
What does the radiator screen status mean:
|
|
|
|||
| Not paired with ENKI box | Searching for signal | Paired with ENKI box | ||
| Heating in progress | Override activated (Manual mode) |
How to calibrate my radiator?
How to reset my device?