* Prerequisites for the Enki application: Internet access and a phone with minimum operating system: Android: 7 / iOS: 15

Article content:

Technical description:

Type : Connected receiver for electric powerline heating
Requires the Enki box: Yes / Box ENKI V1
Status feedback: Yes
Size: 55 mm x 120 mm x 24 mm
Maximum power of the controlled device: 3680 W - 16 A
Measurement of active power consumed: in W or kW, Measurement accuracy: 1%
Functionalities:
- Control 6 radiator orders
- Retrieve energy consumed since last power-on (in J, Wh or kWh)
- Repeater function
Connection: To be connected between the mains power supply and the radiator
Cable cross-section: Up to 2.5 mm²
Interior use only
Operating temperature: 0°C/+40°C
Storage temperature: -20°C/+70°C
Power supply: 230 Vac / 50 Hz
Average consumption: < 1W
Installation: wall-mounted, surface-mounted (dowels and screws provided)
Colour: Sand / Pure White
Protection: IP20
Weight: 80g
Radio profile:
- Radio protocol: EnOcean / Profile D2-O1-OC
- Radio frequency: 868.3 MHz
- Bit rate: 125 kbit/s
- Modulation: ASK
- Transmitter power: +5 dBm (EIRP)
- Radio range:
  - In free field: 80m
  - Masonry: 20m, through 3 walls max
  - Reinforced concrete: 10m, through 1 wall/ceiling max.
  - Plasterboard/Wood: 30m, through 5 walls max.

Object functionality	Properties	Integration in a scenario
Object functionality	Properties	Actions	Triggers	Conditions
Change the target temperature mode of the thermostat	OFF / Frost protection / Economy / Comfort / Comfort -1 / Comfort -2	✔	✔	-
Programming	Via the heating menu	✘	✘	-
Check / Retrieve electricity consumption	Via the cumulative consumption and consumption history (day, week, month, year)	✘	✘	-