Prerequisites for installation and use:
- Enki App* + Enki Box or Enki Connect Box / Essentiel b Connect
* Prerequisites for the Enki app: Internet access and a phone with minimum operating system: Android: 7 / iOS: 15
Communication protocol:
- Enocean
Available country:
- France
State feedback available:
- Yes
Alexa voice control:
- Not direct, but possible via manual scenarios
Google Home voice control:
- Not direct, but possible via manual scenarios
Article content:
Technical description
Product functionality in the ENKI app
Product view
What does the LED status of my product mean?
How to reset my device?
Technical documents / user manual
Technical description:
- Type: Connected receiver for electric heating without pilot wire
- Requires Enki box: Yes / Enki Box V1
- State feedback: Yes
- Size: 55 mm x 120 mm x 24 mm
- Maximum power of controlled device: 3680 W - 16 A
- Measurement of active power consumed: in W or kW, Measurement accuracy: 1%
-
Features:
- ON/OFF control of the radiator
- Energy consumption feedback since last power on (in J, Wh or kWh)
- Repeater function
- Connection: To be connected between mains power and radiator
- Cable section: Up to 2.5 mm²
- Usage: Indoor only
- Operating temperature: 0°C / +40°C
- Storage temperature: -20°C / +70°C
- Power supply: 230 Vac / 50 Hz
- Average consumption: < 1W
- Installation: Wall-mounted, surface-mounted (anchors and screws provided)
- Color: Sand / Pure white
- Protection: IP20
- Weight: 80g
-
Radio profile:
- Radio protocol: EnOcean / Profile D2-O1-O8
- Radio frequency: 868.3 MHz
- Bit rate: 125 kbit/s
- Modulation: ASK
- Transmission power: +5 dBm (EIRP)
-
Radio range:
- In open field: 30 m
- Masonry: 20m, through up to 3 walls
- Reinforced concrete: 10m, through 1 wall/ceiling max.
- Drywall/Wood: 30m, through up to 5 walls
Product functionality in the ENKI app:
| Device functionality | Properties | Scenario integration | ||
| Actions | Triggers | Conditions | ||
| Turn On / Off | Product On - Off function | ✔ | ✔ | ✔ |
|
Timer function: Turn off in / Turn on in |
Set a time during the day to put the device "OFF" or "ON" | ✘ | ✘ | ✘ |
|
Timer function: Cancel timer |
"STOP" the timer set for "Turn off in or turn on in" |
✘ | ✘ | ✘ |
| Programming | Via the heating menu | ✘ | ✘ | ✘ |
| Check / Retrieve electrical consumption | Via cumulative consumption and consumption history (day, week, month, year) |
✘ | ✘ | ✘ |
|
|
|
| Control page | Settings |
Product view:
What does the LED status of my device mean:
| Light on | Slow blinking | Blinks 10 times very quickly then turns off | Light off |
| Radiator on | Device settings | Pairing in progress. Pairing signal detected | Radiator off |
How to reset my device?