Installation and Usage Prerequisites:
- Enki App* + Enki Box
* Prerequisites for the Enki app: Internet access and a phone with a minimum operating system: Android: 7 / iOS: 15
Communication Protocol:
- Enocean
Available Country:
- France
State Feedback Available:
- Yes
Alexa Voice Control:
- No
Google Home Voice Control:
- No
Article Contents:
Technical Description
Product Functionality in the ENKI Application
Product View
What Does the LED Status of My Product Mean?
How to Reset My Device?
Technical Documents / User Manual
Technical Description:
- Type: Built-in connected module for lighting
- Requires Enki Box: Yes / ENKI Box V1
- State feedback: Yes
- Power supply: 230V AC 50 Hz
- Maximum power: 2 x 1150 W (resistive load)
- Operating temperature: from 0°C to 40°C
- Dimensions: 40 mm (l) x 44 mm (W) x 16.9 mm (h)
- Radio protocol: EnOcean
- Central radio frequency: 868.3 MHz
- Frequency band used: 868.0 to 868.6 MHz
- Maximum radio power: +3 dBm
- Signal range: 20-30 meters indoors
- EEP (EnOcean® Profile): D2-01-12
Product Functionality in the ENKI Application:
| Device Functionality | Properties | Scenario Integration | ||
| Actions | Triggers | Conditions | ||
| Turn On / Off |
Product "ON" - "OFF" function Distinct Channel 1 and Channel 2 |
✔ | ✔ | ✔ |
|
Timer function: Turn off in / Turn on in |
Set a time of day to turn the device "OFF" or "ON" | ✘ | ✘ | ✘ |
|
Timer function: Cancel the timer |
"STOP" the timer set for "Turn off in or turn on in" |
✘ | ✘ | ✘ |
| Scheduling |
Set a start time and device state Set an end time and device state (optional) Choose execution days |
✘ | ✘ | ✘ |
| Control Page | Settings | |
Product View:
What Does the LED Status of My Device Mean:
| Flashing Red |
Flashing Red Flashes twice green And steady green. |
Steady Green | Flashing Orange |
|
Module in listening mode. Ready to receive pairing signal from the Enki box |
Detection of a pairing signal during listening phase. |
Powered module / Standard state (This does not mean it is associated with the ecosystem) |
Pre-reset phase Waiting for confirmation to perform full reset |
How to Reset My Device?