Requirements for installation and use:

• Enki App* + Enki Box

* Requirements for the Enki app: Internet access and a phone with minimum operating system: Android 7 / iOS 15

Communication protocol:

• Dio 433 radio

Available countries:

• France

State feedback available: 

• No

Alexa voice control: 

• Not direct, but possible via manual scenarios

Google Home voice control: 

• Not direct, but possible via manual scenarios

Article content:

• Technical description

• Product functionality in the ENKI app

• Product view

• What does the LED status of my product mean?

• How to reset my device?

• Technical documents / user manual

Technical description:

• Type: Connected motorization for roller shutters
• Requires Enki box: Yes / ENKI Box V1
• State feedback: No
• Frequency: 433.92 MHz
• Radio protocol: DiO 1.0
• Radio frequency: 433 MHz
• Transmission range: 50 m (line of sight)
• Power supply: 230V - 50 Hz
• Operating temperature: -10 to 40° C
• Indoor use: IP44
• Remote control: Lithium battery CR 2032 3V (included)
• Power: 150 W / 165 W / 115 W / 260 W
• Number of channels: 1
• Amperage: 0.65 A / 0.75 A / 0.55 A / 1.2 A
• Use: Indoor use only
• Contents: 1 tubular motor + 1 octagonal ring + 1 mounting bracket + 1 end-stop adjustment key + 1 remote control

Product functionality in the ENKI app:

Control page	Settings

Product view:

What does the LED status of my device mean:

Press and hold the [I] button on the shutter control remote for two seconds. (Depending on your shutter's position, it will open during the press) After two seconds, release; the shutter will briefly move back and forth.		After putting the motorization in listening mode: Start the pairing step in the Enki app. The Enki box emits a pairing signal. | Press the [I] / [ON] / [UP] button on the 433 MHz remote to pair. The shutter confirms reception with a back-and-forth movement.
The motorization switches to listening mode to associate a new remote control or a compatible 433 MHz home automation box.		Registering the transmitter to authorize motorization control.

How to reset my device?

Technical documents / user manual