Prerequisites for installation and use :
- Enki App* + Enki Box or Enki Connect Box / Essentiel b Connect Box
* Prerequisites for the Enki app: Internet access and a phone with minimum operating system: Android: 7 / iOS: 15
Communication protocol:
- Zigbee
Available countries:
- France**
- Spain
- Italy
- Portugal
**Essentiel b Connect Box available only in France
Status feedback available :
- Yes
Alexa voice control :
- Yes
Google Home voice control :
- Yes
Article contents:
Technical description
Product functionality in the ENKI app
Product view
What does the LED status of my product mean?
How to reset my device?
Technical documents / user manual
Technical description:
- Type: Connected motorization for roller shutter
- Requires ENKI box: Yes / ENKI Box V1 - ENKI Connect Box
- Product reference: 87554450
- EAN: 3276007640564
- Model: WSER40-10/14zigbee + WSXE302
- Status feedback: Yes
- Power supply: 230V ~
- Motor power: 116 W
- Nominal torque: 10 Nm
- Tube shaft diameter: 40 mm
- Nominal speed: 14 Rpm
- Cable length: 2 meters
- Radio protocol: Zigbee 3.0 (IEEE 802.15.4)
-
Connected module:
- Frequency: 2.4 GHz
- Frequency band used: 2400.0 - 2483.5 MHz
- Maximum radio power: 20 dBm
- Range: 10 meters indoors (All materials between the product and the ENKI box reduce the operating distance mainly: reinforced concrete wall, concrete wall, metal surfaces). Take this into account when positioning your product.
-
Remote control:
- Frequency: 433 MHz
- Frequency band used: 433.075 - 434.755 MHz
- Maximum radio power: 10 dBm
- Range: 40 meters indoors (All materials between the product and the ENKI box reduce the operating distance mainly: reinforced concrete wall, concrete wall, metal surfaces).
- Power supply : CR2032 3V button battery
- Noise level when moving: 43 dB
- Maximum load: 30 Kg
- Operating temperature range: -20 / +40 °C
- Operating humidity range: 80% RH max
- Nominal operating time: 4 minutes
-
Dimensions:
- Motor body diameter: 35 mm
- Main body length: 567 mm
- Use: indoor
Information:
The motor is equipped with thermal protection. In case of repeated use, the thermal protection may activate following normal motor heating. In this case, the motor stops and cannot be controlled either up or down until its internal temperature decreases. This waiting time can last from a few minutes to several tens of minutes.
Product functionality in the ENKI app:
| Device functionality | Properties | Scenario integration | ||
| Actions | Triggers | Conditions | ||
| Open / Close | Min: 0% / Max 100% / Step: 1% | ✔ | ✔ | ✔ |
| Change roller shutter operating direction | Normal or reversed Up / Down | ✘ | ✘ | ✘ |
| View roller shutter position | See the shutter position in real time | ✘ | ✘ | ✘ |
| Control button | Up / Stop / Down | ✘ | ✘ | ✘ |
| Control page | Settings | |
Product view:
What does the LED status of my device mean:
| Flashes blue rapidly | Flashes blue rapidly then turns off |
|
Not paired, pairing in progress. The module is listening and searching for the pairing signal from the home automation box |
Pairing in progress, signal detected. The module has detected the pairing signal from the home automation box |
How to reset my device?
| Perform a reset of my connected equipment | ||
| # Press the central button of the connected module four times quickly (less than 1.5 seconds). | ||
|
Press 4 times quickly in less than 1.5s | ||
| # The module flashes blue rapidly. The module is reset and goes back to pairing mode | ||
|
The module flashes blue rapidly. Reset is successful. It is again in pairing mode. |