Prerequisites for installation and use:

• Enki Application* + Enki Box

* Prerequisites for the Enki application: Internet access and a phone with minimum operating system: Android: 7 / iOS: 15

Communication protocol:

• Enocean

Available country:

• France

State feedback available: 

• Yes

Alexa voice control: 

• Yes

Google Home voice control: 

• Yes

Article contents:

• Technical description

• Product functionality in the ENKI application

• Product view

• What does the LED status of my product mean?

• How to activate repeater mode?

• How to reset my device?

• Technical documents / user manual

Technical description:

• Type: Built-in connected module for roller shutters and blinds
• Requires Enki box: Yes / ENKI Box V1
• State feedback: Yes
• Power supply: 230V AC 50 Hz
• Maximum motor power: 280 W / ≤ 60 Nm at 12 rpm
• Operating temperature: from 0°C to 40°C
• Dimensions: 40 mm x 44 mm x 16.9 mm
• Radio protocol: EnOcean
• Central radio frequency: 868.3 MHz
• Frequency band used: 868.0 to 868.6 MHz
• Maximum radio power: +3 dBm
• Signal range: 20 - 30 meters indoors
• EEP (EnOcean® Profile): D2-05-00
• Protection rating: IP 2X
• Pairing: Up to 22 direct controllers on the module

• Compatible types of wired switches:
   

  Monostable	Bistable type 1	Bistable type 2	Bistable type 3	Tristable

The product is not compatible with BuBendorff and Deltadore motorization

Product functionality in the ENKI application:

Control page	Settings

Product view:

What does the LED status of my device mean:

Solid red	Flashing red	Flashing red Blinks twice green And solid green.	Solid green	Flashing orange
Factory mode. The module is not paired	Module in listening mode. Ready to receive the pairing signal from the Enki box	Detection of a pairing signal during listening mode.	Module paired	Pre-reset phase Waiting for confirmation to perform full reset

How to activate repeater mode?

How to reset my device?

Technical documents / user manual