Somfy: Terrace Awning (RTS) - Product Sheet

Store de terrasse.gif

Séparateur horizontale vert.png

Prerequisites for installation and use :

* Prerequisites for the Enki application: Internet access and a phone with minimum operating system: Android: 7 / iOS: 15

Communication protocol:

  • RTS 

Available country:

  • France

State feedback available: 

  • No

Alexa voice control : 

  • Not direct, but possible via manual scenarios

Google Home voice control : 

  • Not direct, but possible via manual scenarios

Séparateur horizontale vert.png

Article content:

 

Technical description:

Somfy Altus Somfy Loggia 50
Somfy Altus.png Somfy Loggia 50.png
  • Type: Motorization for connected terrace awning
  • Requires Enki box: Yes / ENKI Box V1
  • State feedback: No
  • Radio protocol: RTS
  • Radio frequency: 433.42 MHz
  • Power supply 230V / 50 Hz
  • Protection: IP44
  • Dimensions: Variable depending on diameter
  • Type: Motorization for connected terrace awning
  • Requires Enki box: Yes / ENKI Box V1
  • State feedback: No
  • Radio protocol: RTS
  • Radio frequency: 433.42 MHz
  • Power supply 230V / 50 Hz
  • Protection: IP44
  • Dimensions: Variable depending on diameter
  • Nominal speed: 17 RPM
  • Minimum tube thickness diameter: 50 mm x 50 mm x 1.5 mm
Somfy LT 50 CSI Somfy Orea
Somfy LT 50 CSI.png Somfy Orea.png
  • Type: Motorization for connected terrace awning
  • Requires Enki box: Yes / ENKI Box V1
  • State feedback: No
  • Radio protocol: RTS
  • Radio frequency: 433.42 MHz
  • Power supply 230V / 50 Hz
  • Protection: IP44
  • Dimensions: Variable depending on diameter
  • Limit switch cage capacity: 34 turns.
  • Torque: 40 Nm. Speed: 12 RPM.
  • Tube length: 774 mm
  • Weight: 3.68 kg
  • Operating temperature: from -20C to +70C.
  • For intermittent use.
  • Maximum number of associated control points: 12
  • Maximum number of associated sensors: 3
  • Type: Motorization for connected terrace awning
  • Requires Enki box: Yes / ENKI Box V1
  • State feedback: No
  • Radio protocol: RTS
  • Radio frequency: 433.42 MHz
  • Power supply 230V / 50 Hz
  • Protection: IP44
  • Dimensions: Variable depending on diameter
  • Electronic limit switch cage. Adjustment via RTS transmitter.
  • Torque: 55 Nm. Speed: 17 RPM.
  • Tube length: 734 mm.
  • Weight: 4.39 kg
  • Operating temperature: from -20C to +70C.
  • For intermittent use.
  • Maximum number of associated RTS control points: 12
  • Maximum number of associated RTS sensors: 3
Somfy Sunea 50 CSI

 

Somfy Sunea 50 CSI.png

  • Type: Motorization for connected terrace awning
  • Requires Enki box: Yes / ENKI Box V1
  • State feedback: No
  • Radio protocol: RTS
  • Radio frequency: 433.42 MHz
  • Power supply 230V / 50 Hz
  • Protection: IP44
  • Dimensions: Variable depending on diameter
  • Electronic limit switch cage. Adjustment via RTS transmitter.
  • Torque Nm: 50. Speed: 12 RPM.
  • Operating temperature: from -20C to +70C.
  • Rated voltage: 230 V
  • Power consumption: 240 W
  • Current consumption: 1.1 A
  • Operating time before trigger: 4 min
  • Trigger temperature: 150°C
  • Average noise level: 55 dBa
  • Minimum winding tube diameter: 50 mm x 1.5
  • Motor weight: 3.1 Kg
  • Standard cable length: 3m
  • Number of cable conductors: 3
  • Cable wire section: 0.75
  • Protection rating: IP44
  • NF Certification
  • Maximum number of associated RTS control points: 12
  • Maximum number of associated RTS sensors: 3

 

Product functionality in the ENKI application:

Device functionality Properties Integration in a scenario
Actions Triggers Conditions
Open / Close Opens or closes the terrace awning ✔ ✘ ✘
Stop Stops the movement of the terrace awning ✘ ✘ ✘
Somfy - Card N2.png Somfy - Card N3.png
Control page Settings

 

Product view:

Somfy Altus Somfy Loggia 50
Somfy Altus - Vue du produit.png Somfy Loggia 50 - Vue du produit.png
Somfy LT 50 CSI Somfy Orea
Somfy LT 50 CSI - Vue du produit.png Somfy Orea - Vue du produit.png
Somfy Sunea 50 CSI
Somfy Sunea 50 CSI - Vue du produit.png

 

What does the LED status of my device mean:

Store de terrasse - Mettre en mode écoute.gif     Store de terrasse - Confirmation de reception de commande.gif
Press the "prog" button on your control remote. The terrace awning makes a brief back-and-forth movement.

 

(After putting the awning in listening mode)

Start pairing on your Enki application or briefly press the "prog" button on the remote to add, the terrace awning makes a brief back-and-forth movement. 
The terrace awning is in listening mode to pair a new remote or a home automation box

 		 Command reception confirmation, registration of the box or remote confirmed. 

 

How to reset my device?

Danger.png Make sure the terrace awning to reset is the only one on the breaker to be operated. If the breaker powers several terrace awnings, then all terrace awnings on this breaker will be reset Danger.png

Reset.png

How to reset.gif

 

Technical documents / user manual

Related articles

Submit a request