Type: Central control for connected roller shutter
Requires Enki box: Yes / ENKI Box V1
State feedback: No
Radio protocol: RTS
Radio frequency: 433.42 MHz
Protection rating: IP40
Class II product
Power supply: 220V - 240V ~ 50 Hz
Output: ~ 250V 3A
Output delay: 3 minutes
Operating temperature: 0° to +40°C
Type: Motorization kit for connected roller shutter
Requires Enki box: Yes / ENKI Box V1
State feedback: No
Radio protocol: RTS
Radio frequency: 433.42 MHz
Range: 200 m in open field (20 m through 2 load-bearing walls)
Motor power supply: 230V / 50 Hz
Memory capacity of up to 12 transmitters
Transmitter battery 3V lithium (type CR2430)
Somfy RMS 1000 & RMS 2000
Somfy Rollerdrive
Type: Motorization kit for connected roller shutter
Requires Enki box: Yes / ENKI Box V1
State feedback: No
Radio protocol: RTS
Radio frequency: 433.42 MHz
Range: 200 m in open field (20 m through 2 load-bearing walls)
Motor power supply 230V / 50 Hz
Power: 100 W
Torque force: 10 Nm
Protection rating: IP 44
Type: Motorization kit for connected roller shutter
Requires Enki box: Yes / ENKI Box V1
State feedback: No
Radio protocol: RTS
Radio frequency: 433.42 MHz
Range: 200 m in open field (20 m through 2 load-bearing walls)
Motor power supply 230V / 50 Hz
Power: 100 W
Torque force: 10 Nm
Protection rating: IP 44
Memory: Maximum of 12 transmitters can be stored in the motor
Transmitter battery: 3V lithium (type CR2430)
Somfy Altus
Somfy Centralis Indoor
Type: Motorization for connected terrace awning
Requires Enki box: Yes / ENKI Box V1
State feedback: No
Radio protocol: RTS
Radio frequency: 433.42 MHz
Power supply 230V / 50 Hz
Protection: IP44
Dimensions: Variable depending on diameter
Type: Motorization kit for connected roller shutter
Requires Enki box: Yes / ENKI Box V1
State feedback: No
Radio protocol: RTS
Radio frequency: 433.42 MHz
Range: 200 m in open field (20 m through 2 load-bearing walls)
Dimensions: 80 mm x 80 mm x 17 mm
Operating temperature: 0°C to +40°C
Protection rating: IP 30
Usage: Indoor, dry room
Battery: 3 V type CR 2430.
Somfy window bay block - window door bay block - traditional window modernization - traditional door window modernization
Somfy LT 50 CSI
Type: Motorization kit for connected roller shutter
Requires Enki box: Yes / ENKI Box V1
State feedback: No
Radio protocol: RTS
Radio frequency: 433.42 MHz
Range: 200 m in open field (20 m through 2 load-bearing walls)
Type: Motorization for connected terrace awning
Requires Enki box: Yes / ENKI Box V1
State feedback: No
Radio protocol: RTS
Radio frequency: 433.42 MHz
Power supply 230V / 50 Hz
Protection: IP44
Dimensions: Variable depending on diameter
Limit switch cage capacity: 34 turns.
Torque: 40 Nm. Speed: 12 rpm.
Tube length: 774 mm
Weight: 3.68 kg
Operating temperature: from -20°C to +70°C.
For intermittent use.
Maximum number of associated control points: 12
Maximum number of associated sensors: 3
Somfy LT 50
Somfy LT 50 CSI
Type: Motorization kit for connected roller shutter
Requires Enki box: Yes / ENKI Box V1
State feedback: No
Radio protocol: RTS
Radio frequency: 433.42 MHz
Range: 200 m in open field (20 m through 2 load-bearing walls)
Motor power supply: 230V / 50 Hz.
Compliance with NFC 73-800 standard (Provide upstream on the circuit, an omnipolar cut-off device (minimum contact opening distance: 3 mm).
Motor equipped with a 3 x 0.75 mm² H05-VV-F type cable, to be placed in conduit if wiring passes outside the building.
Maintain a minimum distance of 20 cm between receiver and transmitter.
Memory capacity: Maximum 16 transmitters per receiver.
Battery life: The lithium battery of the transmitters ensures about 3 years of operation, with 4 actions per day. At the end of battery life, the LED(s) no longer light up when a command is given and the command is not received by the receiver.
Type: Motorization for connected roller shutter
Requires Enki box: Yes / ENKI Box V1
State feedback: No
Radio protocol: RTS
Radio frequency: 433.42 MHz
Range: 200 m in open field (20 m through 2 load-bearing walls)
Power supply:
Antenna: Integrated
Operating consumption: 120W
Minimum voltage: 207V
Maximum voltage: 244V
Current: 0.5 A
Voltage/frequency: 230V - 50 Hz
Coding: 16 million possibilities with rolling code
Number of channels: 12 different
Mechanical:
Cage capacity: 200 turns
Limit switch type: Electronic
Head type: Standard star
Rated speed: 17 turns / minute
Rated torque: 10 Nm
Certification: NF Electricity
Protection rating: IP 44
Insulation class: I
Connection cable: Detachable connector
Cable type: VVF
Wire section: 0.75 mm²
Cable length: 3m
Number of wires in cable: 3
Dimensions: 500 mm x 663 mm x 50 mm
Weight: 1.85 Kg
Automatic limit switch adjustment if the roller shutter is equipped with stops and locks. Otherwise, adjustment from the RTS transmitter.
For intermittent use.
Thermal time: 4 min
Noise level (according to Somfy measurements): 47 dBa
Operating temperature: -10° / +40 °C
Thermal safety: 140°C
Somfy Oximo Wirefree
Type: Motorization for connected roller shutter
Requires Enki box: Yes / ENKI Box V1
State feedback: No
Radio protocol: RTS
Radio frequency: 433.42 MHz
Range: 200 m in open field (20 m through 2 load-bearing walls)
12V RTS radio motor for roller shutters.
Electronic limit switch cage.
4 adjustment modes: manual / semi-automatic up - down / fully automatic (if locks + stops).
Favorite position: pre-registered.
Coding: 16 million possibilities + rolling code for maximum security.
Monocrystalline photovoltaic panel in resin:
Weight: 230g.
Panel power: 3.2 W.
12V NiMH technology battery (delivered charged):
Remote programming button.
Battery capacity: 2200 mAh.
Charging frequency: max 2 per year.
Maximum storage duration (before first use): 6 months at 20°C.
Dimensions: L 470 x H 60 x D 6 mm
Estimated lifespan over 15 years (tested by external laboratory)
Very good efficiency even at low sunlight levels.
Battery operating temperature: -20° to +70°C.
Battery:
Provides optimal autonomy of 45 days even in total darkness based on 2 ups and 2 downs per day
Estimated battery life: between 8 and 10 years (tested by external laboratory).
In case of deep discharge, the shutter stops when going up, the downward movement cannot be performed but the # shutter executes a brief back-and-forth
Backup solution possible thanks to the Somfy external battery charger
Battery capacity: 2200 mAh
Product functionality in the ENKI application:
Device functionality
Properties
Scenario integration
Actions
Triggers
Conditions
Open / Close
Opens or closes the roller shutter
✔
✘
✘
Stop
Stops the roller shutter's movement
✘
✘
✘
Control page
Settings
Product view:
Somfy Centralis Uno
Somfy Dirigo
Somfy RMS 1000 & RMS 2000
Somfy Rollerdrive
Somfy Altus
Somfy Centralis Indoor
Somfy window bay block - window door bay block
Somfy traditional window modernization - traditional door window modernization
Somfy LT 50 CSI
Somfy LT 50
Somfy Oximo
Somfy Oximo Wirefree
What does the LED status of my device mean:
Press the "prog" button on your control remote. The roller shutter makes a brief back-and-forth movement.
(After putting the roller shutter in listening mode)
Start pairing on your Enki app or briefly press the "prog" button on the remote to be added, the roller shutter makes a brief back-and-forth movement.
The roller shutter is in listening mode to pair a new remote control or a home automation box
Command reception confirmation, box or remote control registration confirmed.
How to reset my device?
Make sure the roller shutter to be reset is the only one on the circuit breaker to be operated. If the circuit breaker powers multiple shutters, then all shutters on this circuit breaker will be reset