Prerequisites for Installation and Use:
- Enki App* + Enki Box or Enki Connect Box / Essentiel b Connect Box
* Prerequisites for the Enki app: Internet access and a phone with minimum operating system: Android 7 / iOS 15
Communication Protocol:
- Zigbee
Available Countries:
- France**
**Essentiel b Connect Box available only in France
State Feedback Available:
- Yes
Alexa Voice Control:
- Not directly, but possible via manual scenarios
Google Home Voice Control:
- Not directly, but possible via manual scenarios
Article Contents:
Technical Description
Product Functionality in the ENKI App
Product View
What Does the Radiator Screen Status Mean?
How to Calibrate My Radiator?
How to Reset My Device?
Technical Documents / User Manual
Technical Description:
-
Type: Connected Electric Heater (1000, 1500, or 2000W)
- Requires Enki Box: Yes / ENKI Box V1 - ENKI Connect Box
-
State Feedback: Yes
- Radio Module Chip Reference: STM32WB55
- Software Version: V1.48
- Antennas (type, impedance): PCB antenna
- Power: tbd
- Transmission: 2.4 GHz to 2.485 GHz
- Protocol: Zigbee
- Operating Temperature Range: 0°C to +40°C
- Powered by: 230 V
-
Description:
- Dry inertia electric radiator.
- Smooth and sleek design front.
- Compact and responsive.
- Long-lasting gentle heat thanks to its large stone.
- Window open and close detection.
- Customizable weekly programming.
- Directly compatible with the “Enki” connected solution.
- Base color: white.
- H mounting for reduced installation time.
- Made in Europe.
- Wall projection: 114 mm
-
Regulation:
- Ultra-precise ambient thermostat with 1/10th degree accuracy.
- Backlit digital LCD display.
- Mode selection and programming.
- Parental lock system.
- Window open/close detector.
- Centralized time programming via 6-order pilot wire.
- Low standby consumption (0.5W)
- Remotely controllable via the box and the ENKI app
Product Functionality in the ENKI App:
| Object Functionality | Properties | Scenario Integration | ||
| Actions | Triggers | Conditions | ||
| Change thermostat target temperature | Min: 7° / Max: 30° / Step: 0.5° | ✔ | ✘ | ✘ |
| Create an override | Temporarily change the equipment temperature for a given time when it is in a program | ✘ | ✘ | ✘ |
| Programming | Via the heating menu or unitary via the control card | ✘ | ✘ | ✘ |
|
|
|
| Control Page | Settings |
Product View:
What Does the Radiator Screen Status Mean:
|
|
|
|||
| Not paired with ENKI box | Searching for signal | Paired with ENKI box | ||
| Heating in progress | Override activated (Manual mode) |
How to Calibrate My Radiator?
How to Reset My Device?