Prerequisites for Installation and Use:
- Enki App* + Enki Box or Enki Connect Box / Essentiel b Connect Box
* Prerequisites for the Enki app: Internet access and a phone with minimum operating system: Android: 7 / iOS: 15
Communication Protocol:
- Zigbee
Available Countries:
- France
State Feedback Available:
- Yes
Alexa Voice Control:
- Not directly, but possible via manual scenarios
Google Home Voice Control:
- Not directly, but possible via manual scenarios
Article Contents:
Technical Description
Product Features in the ENKI App
Product Overview
What Does the LED Status of My Product Mean?
How to Reset My Device?
Technical Documents / User Manual
Technical Description:
- Type: Connected Thermostatic Head
- Requires ENKI box: Yes / ENKI Box V1 - ENKI Connect Box
- State feedback: Yes
- Reference: eTH700
- Article code: 531700
- EAN code: 3335355317006
- Power supply: 4.5V (3 alkaline batteries 1.5V - LR6/AA)
- Radio protocol: 3.0 (IEEE 802.15.4)
- Radio frequency: 2.4 GHz
- Zigbee frequency band: 2405 ~ 2480 MHz
- Maximum radio power: 3.25mW e.i.r.p
- Range: Up to 10m indoors
- Operating temperature: 0°C - 40°C
- Mounting: By nut M30x1.5 or M28 x 1.5 (adapters for Danfoss RA, RAV, RAVL, GIA, CAL valves provided)
- Dimensions: 59.4 mm (w) x 59.4 mm (d) x 95 mm (h)
- Compatible with collective heating: Yes
- Compatible with underfloor heating: No
- Display: Backlit
- Color: White
- Main material: Matte polycarbonate
-
Usage:
- Indoor
- Local or connected
|
Hysteresis: -1°C / Setpoint / +1°C What is it? It’s like a small "waiting zone" for your thermostat.
In short: This prevents your boiler from turning on and off constantly for a very small temperature change, which is better for the device and your energy consumption! A hysteresis of 1°C is a standard value and generally very suitable for most residential heating installations, offering a good balance between comfort, energy savings, and equipment preservation. This value cannot be customized in our Enki application. |
Product Features in the ENKI App:
| Device Feature | Properties | Scenario Integration | ||
| Actions | Triggers | Conditions | ||
| Change thermostat target temperature | Min: 4° / Max: 35° / Step: 0.5° | ✔ | ✘ | ✘ |
| Create an override | Temporarily change the equipment temperature for a given time when it is in a schedule | ✘ | ✘ | ✘ |
| Temperature reading history | History of temperature readings by "day", "week", "month", and "year" |
✘ | ✘ | ✘ |
| Scheduling | Via heating menu or individually via the control card | ✘ | ✘ | ✘ |
| Ambient temperature retrieval | Min: 0° / Max: 40° / Step: 0.1° |
✘ | ✔ | ✔ |
| Heating demand | No / Yes |
✘ | ✔ | ✔ |
| Child lock |
Enabled / Disabled Locks the screen completely (No access to buttons or display) |
✔ | ✔ | ✔ |
| Temperature calibration | Relative to the current temperature: -9.9° to +9.9° / Step: 0.1° | ✘ | ✘ | ✘ |
| Open window detection | Enable / Disable | ✔ | ✔ | ✔ |
| Boiler control | Does not control boiler / Controls boiler | ✘ | ✘ | ✘ |
| Battery level detection |
Battery level indication Push notification received in case of low battery (if push notifications are enabled). Low battery badge on the device. |
✘ | ✔ | ✔ |
|
|
| Control Page |
|
|
| Settings |
Product Overview:
What Does the LED Status of My Device Mean:
| Blinking "in" | Blinking AD | "Of" | Clock | Blinking signal |
|
Factory state First power-up, wait until "in" stops blinking before installing the thermostatic head. |
Calibration The head is calibrating for about five seconds. |
Anti-freeze function The valve is closed and the anti-freeze function is active. |
On: Automatic mode is enabled. Off: Manual mode is enabled. |
Connecting The thermostatic head is searching for the Enki box. |
| Blinking then steady signal | Flame | Battery | "CA" | "LC" |
| Enki box detected, installation finalization in progress. |
Heating in progress The head is open so the radiator can heat. |
Low battery Please replace the thermostatic head batteries. |
Anti-calcification function Descaling operation in progress. |
Child lock function The head is locked and changes are not possible. |
How to Reset My Device?