Prerequisites for installation and use:

• Enki Application

* Prerequisites for the Enki application: Internet access and a phone with minimum operating system: Android: 7 / iOS: 15

Communication protocol:

• Cloud

Available country:

• France

Status feedback available:

• Yes

Alexa voice control:

• Not direct, but possible via manual scenarios

Google Home voice control:

• Not direct, but possible via manual scenarios

Article contents:

• Technical description

• Product functionality in the ENKI application

• Product view

• What does the LED status of my product mean?

• How to reset my device?

• Technical documents / user manual

Technical description:

• Type: Motor or module for connected electric roller shutter
• Requires Enki box: No
• Status feedback: Yes
• Radio protocol: IO
• Radio frequency: 868 - 870 MHz, < 25 mW
  • Radio range in open field: 80 m
• Native application: TaHoma by Somfy
• Gateway required and recognized by Enki:
  • TaHoma Switch
  • Connectivity kit
  • TaHoma DIN-Rail / TaHoma Rail-DIN S
  • TaHoma Premium
  • Connexoon

Altus RS io	Izymo io receiver for roller shutter
Protection rating: IP 44 Maximum number of control points and associated sensors: 9 Safety level: Class I Certifications: CE NF Dimensions: (L x W x H): 740 mm x 63 mm x 63 mm Weight: 4.18 kg Wheel riveting distance: 717 mm Operating consumption: 290 W Minimum voltage: 205 V Maximum voltage: 255 V Nominal current: 1.5 A Power supply: AC - RGE 1 - 230V/50 HZ Antenna: Integrated Built-in manual disengagement option: No External manual disengagement option: No Nominal speed: 17 RPM Nominal torque: 55 Nm End of travel type: Electronic End of travel cage capacity: 241 Motor power scale: 3-phase AC motor 37.5 W to 750W Repeatability: < +/- 5 Motor head type: Star Thermal safety: 140 °C Cable type: VVF Removable cable: No Cable length: 5 m Cable color: White Number of wires per cable: 3 Plug type: Stripped Wire cross-section: 0.75 mm² Minimum operating temperature: -10 °C Maximum operating temperature: 40 °C Minimum storage temperature: -20 °C Maximum storage temperature: 70 °C Thermal cut-off delay: 4 min Noise level (dB): 64 dB Supported product type: Roller Shutters	Power supply: 220/240V, 50 Hz, 10A max (DDR 2A curve C mandatory upstream) Pollution: Cat II Power cable section: Min: 0.75 mm², Max: 1.5 mm² Protection rating: IP 20 Protection class: Double insulation without ground Dimensions: 43 x 43 x 18 mm Number of io-homecontrol control points: 1-way: 10 remote controls, 2-way: unlimited Operating temperature: 0°C to +55°C Humidity: 85% RH at 25°C Altitude: < 2000m

Oximo 40 Solar io	Slim io receiver for roller shutter
Power supply: 12 V DC Operating consumption: 26 W Standby consumption: 0 W Operating temperature: -20°C to +60°C Protection rating: IP44 Certifications: CE NF Radio frequency: 868.250 MHz / 868.950 MHz / 869.850 MHz Noise level (dB): 70 dB	Mains power supply: AC - RGE 1 - 230V/50HZ Standby consumption: 0.42 W Protection rating: IP 54 Electrical insulation: Class I Maximum number of control points and associated sensors: 9 Frequency bands and maximum power used: 868.000 MHz - 868.600 MHz ERP < 25 mW 868.700 MHz - 869.200 MHz ERP < 25 mW 869.700 MHz - 870.000 MHz ERP < 25 mW Operating temperature: -30 °C to +70 °C Number of operation cycles: 10000 Pollution degree: 2 Maximum power: 690W Rated current: 3A Rated impulse withstand voltage: 2500V Service type: S3 Switch type: PTI (Tracking index): > 175V Cooling condition: Without forced cooling Protection device: Without protection device Cut-off type: Micro-cut Load type: cos φ >0.9 Design: Independently mounted switch Incandescent wire temperature: 850°C Printed circuit board coating type: Type A Test conditions: Simulated with a practically resistive load Color/Finish: Black

SONESSE 40 io	Sunsea screen 40 io
Power supply: AC - RGE 1 - 230V/50HZ Operating consumption: 120 W Standby consumption: 0.5 W Frequency bands and maximum power used: 868,000 MHz - 868,600 MHz ERP <25 mW 868,700 MHz - 869,200 MHz ERP <25 mW 869,700 MHz - 870,000 MHz ERP <25 mW Operating temperature: 0°C to +60°C Protection rating: IP 31 Safety level class: II Maximum number of control points and associated sensors: 12 Protection rating: IP31 Noise level (dB): 44 dB Supported product type: Roller blinds	Power supply: AC - RGE 1 - 230V/50HZ Operating consumption: 120 W Standby consumption: 0.39 W Radio frequency: 868.250 MHz / 868.950 MHz / 869.850 MHz Operating temperature: -20 °C to +70 °C Protection rating: IP 44 Maximum number of control points and associated sensors: 9 Safety level: Class I Noise level (dB): 52 dB Supported product type: Exterior blinds

Sunilus io	Yslo io (Swing shutter motor)
Power supply: AC - RGE 1 - 230V/50HZ Standby consumption: 0.36 W Radio frequency: 868.250 MHz / 868.950 MHz / 869.850 MHz Operating temperature: -20 °C to +70 °C Protection rating: IP 44 Maximum number of control points and associated sensors: 9 Safety level: Class I Certification: CE UKCA Noise level: 46 dB	Dimensions: W = 110 mm - H = 60 mm Rail length: 2 mm Frequency bands and maximum power used: 868.000 MHz - 868.600 MHz ERP <25 mW 868.700 MHz - 869.200 MHz ERP <25 mW 869.700 MHz - 870.000 MHz ERP <25 mW Power supply: AC - RGE 1 - 230V/50HZ Standby consumption: 0.4 W Operating consumption: 10 W Operating temperature: -20 to +60°C Safety level: Class II Protection rating: IP 24 Maximum number of io control points (1 way) associated: 9 Maximum number of io sensors associated: 3 Nominal torque: 4 N·m Peak torque: 50 N·m Maximum power absorbed at peak torque: 50 W Noise level (dB): 46 dB Supported product type: Swing Shutters Supported product weight: 40 kg

Product functionality in the ENKI application:

Control page	Settings

Product view:

Altus RS io	Izymo io receiver for roller shutter

Oximo 40 Solar io	Slim io receiver for roller shutter
a  The crown b  The wheel c  The motorization   a  4-pin motor connector b  4-pin Y cable connector c  2-pin battery connector d  2-pin Y cable connector e  2-pin solar panel connector f  4-pin Y cable connector

What does the LED status of my device mean:

Izymo io receiver for roller shutter

Solid red	Solid red, blinks blue twice, returns to solid red	Solid red, blinks blue three times, returns to solid red	Solid green	Solid green and blinks green quickly then turns off
The module is in configuration mode	In configuration mode, the wired inputs command mode has been set to manual	In configuration mode, the wired inputs command mode has been set to automatic and manual	The module is in pairing mode, ready to pair or delete a receiver or a home automation box	In pairing mode, the module detects the signal of the receiver or box to pair or delete

How to reset my device?

Altus RS io / Slim io receiver for roller shutter / SONESSE 40 io / Sunsea screen 40 io / Sunilus io		Izymo io receiver for roller shutter
Perform a reset of my connected device # Position the shutter at mid-height and cut off the shutter power for two seconds. Then restore power and wait between five and fifteen seconds. Position the shutter at mid-height. Then cut power for 2 sec. Restore shutter power and wait between 5 and 15 sec.   # Cut shutter power again for two seconds and restore power. The shutter will move for a few seconds. Press and hold the "PROG" button on your IO remote for about 7 seconds. Your shutter will move up and down twice. The reset is successful. Cut power for 2 sec. Restore power, the shutter will move for a few seconds. Hold the "PROG" button on your remote for 7 sec. The shutter moves 2 up-and-down cycles. Reset successful		Perform a reset of my connected device # Press and hold the "PRG" button on the module. After two seconds, the LED lights red, continue holding the button. Press and hold "PRG" After 2 sec. the red LED lights up, keep holding!   # After 7 seconds the LED blinks, keep holding. Moments later the shutter moves up and down twice, release, the reset is successfully done. After 7 seconds, the red LED blinks, keep holding! The shutter performs 2 up-and-down cycles, release. Reset successful.

Oximo 40 Solar io		Yslo io (Swing shutter motor)
Perform a reset of my connected device # Position the shutter at mid-height. Disconnect the motor connector from the Y cable for 10 seconds. Then reconnect the motor connector to the Y cable for 10 to 15 seconds. Position the shutter at mid-height. Disconnect the motor connector from the Y cable for 10 sec. Reconnect the motor connector to the Y cable for 10 to 15 sec.   # Disconnect the motor connector from the Y cable again for 10 seconds. Then reconnect the motor connector to the Y cable, the shutter will move for a few seconds. Press the "PROG" button on your IO remote for about 7 seconds. The shutter will move up and down twice, release. The reset has been successfully completed. Disconnect the motor connector from the Y cable for 10 sec. and reconnect it. The shutter will move for a few seconds. Hold the "PROG" button on your remote for 7 sec. The shutter makes 2 up-and-down cycles. Reset successful		Perform a reset of my connected device # Hold the cross button on the control panel of your motorization until you hear two beeps. Press and hold the cross button You should hear a beep around 7 s. and another around 15 s.   # At the second beep, release. The shutter will perform two up-and-down cycles, with a beep at the end of each cycle. The reset has been successfully completed. At the second beep, release The shutter will perform two up-and-down cycles with a beep at the end of each cycle. Reset successfully completed.

Technical documents / user manual