Prerequisites for installation and use:
- Enki Application
* Prerequisites for the Enki application: Internet access and a phone with minimum operating system: Android: 7 / iOS: 15
Communication protocol:
- Cloud
Available country:
- France
Status feedback available:
- Yes
Alexa voice control:
- Not direct, but possible via manual scenarios
Google Home voice control:
- Not direct, but possible via manual scenarios
Article contents:
Technical description
Product functionality in the ENKI application
Product view
What does the LED status of my product mean?
How to reset my device?
Technical documents / user manual
Technical description:
- Type: Connected electric sliding gate
- Requires Enki box: No
- Status feedback: Yes
- Radio protocol: IO
-
Radio frequency: 868 - 870 MHz, < 25 mW
- Number of channels: 4
- Radio range in open field: 80 m
- Native application: TaHoma by Somfy
-
Gateway required and recognized by Enki:
- TaHoma Switch
- Connectivity kit
- TaHoma DIN-Rail / TaHoma Rail-DIN S
- TaHoma Premium
- Connexoon
| Elixo Smart IO: |
|
Product functionality in the ENKI application:
| Device functionality | Properties | Integration in a scenario | ||
| Actions | Triggers | Conditions | ||
| Open / Close | Open or close the gate | ✔ | ✔ | ✔ |
| Stop | Stops the gate | ✘ | ✘ | ✘ |
| Pedestrian position |
Set the gate to pedestrian position (only in scenario) |
✔ | ✘ | ✘ |
| Control page | Settings | |
Product view:
Elixo Smart IO:
| Motorization: | Ground fixing kit: | ||||
| Reference | Quantity | Description | Reference | Quantity | Description |
| 1 | 1 | Cover | 9 | 4 | Lag screw |
| 2 | 1 | Control unit | 10 | 12 | Nut |
| 3 | 1 | Manual unlocking mechanism | 11 | 8 | Washer |
| 4 | 1 | 24V motor | 12 | 1 | Drilling template |
| 5 | 1 | Reducer | 13 | 1 | Mounting plate |
| 6 | 1 | Pinion | |||
| 7 | 2 | Handle lock key | |||
| 8 | 2 | Remote control | |||
| Reference | Description | Comments |
| 1 | Set indicator |
|
| 2 | Prog button |
|
| 3 | PROG button | Memorization / deletion of radio control points |
| 4 | SET button | Press 0.5 s: enter and exit parameter menu |
| Press 2 s: trigger auto-learning | ||
| Press 7 s: erase auto-learning and parameters | ||
| Interrupt auto-learning | ||
| 5 | Minus button | Before auto-learning, close door by holding down |
| Interrupt auto-learning | ||
| During setting, modify parameter value | ||
| 6 | Plus button | Before auto-learning, open door by holding down |
| Interrupt auto-learning | ||
| During setting, modify parameter value | ||
| 7 | Setting indicators | P0: Operating mode |
| P1: Gate speed | ||
| P2: Slowdown zone in opening and closing | ||
| P3: Obstacle detection sensitivity | ||
| P4: Photoelectric cells | ||
| Px: Safety edge self-test | ||
| 8 | Removable terminal block | 230V power supply |
| 9 | Removable terminal block | Auxiliary output |
| 10 | Removable terminal block | Orange light |
| 11 | Removable terminal block | Photoelectric cells |
| 12 | Low voltage power input 9.6V | Compatible with 9.6V batteries |
| 13 | Removable terminal block | Wired control point, photoelectric cells, safety edge |
| 14 | Removable terminal block | Remote antenna |
| 15 | Photoelectric cells indicator |
|
| 16 | Safety edge indicator | |
| 17 | Pedestrian opening operation indicator | |
| 18 | Full opening operation indicator |
| Terminals | Connection | Comments | |
| 1 | L | 230 V power supply | Ground connection available on motor flange |
| 2 | N | ||
| 3 | Aux | Zone lighting |
230 V - 500 W max
|
| 4 | Dry contact | ||
| 5 | Flash | Orange light output 24 V - 15 W | |
| 6 | |||
| 7 | - | 24 V accessory power supply | |
| 8 | + | ||
| 9 | Tx | Photoelectric cells transmitter power supply for self-test | |
| 10 | Batt | Battery | Compatible with 9.6 V battery |
| 11 | |||
| 12 | Total opening control input | Dry contact NO | |
| 13 | Common | ||
| 14 | Partial opening control input | Dry contact NO | |
| 15 | Test | Safety test output | |
| 16 | Se | Safety edge input | Dry contact NC |
| 17 | Common | ||
| 18 | Cell | Safety cell input | Dry contact NC or BUS |
| 19 | Ant | Antenna ground | |
| 20 | Antenna core | ||
What does the LED status of my device mean:
Elixo Smart IO:
| SET indicator | |||
| Slow blinking | Fast blinking | Solid | Very fast blinking |
|
Factory mode. First power-up, learning not done |
Learning in progress Searching for device for learning |
Learning completed Device recognized correctly |
Error Fault detected on electronics (motor thermal, ...) |
| PROG indicator | ||
| Solid | Fast blinking | Blinks once slowly |
|
Searching for a radio point Waiting for memorization of a radio control point |
Recording a radio point Validation of memorization of a radio control point |
Radio reception Receiving a radio frame from a control point |
| Photoelectric cells indicator | ||
| Off | Fast blinking | Solid |
|
Normal operation Use of products normally |
Self-test in progress Testing photoelectric cells |
Detection or fault Photoelectric cells detection in progress or a fault is recorded. |
| Safety edge indicator | ||
| Off | Fast blinking | Solid |
|
Normal operation Use of products normally |
Self-test in progress Testing safety edge |
Detection or fault Safety edge detection in progress or a fault is recorded. |
| Pedestrian opening operation indicator | Full opening operation indicator |
| Solid | Solid |
|
Command activated The pedestrian opening command is activated |
Command activated The full opening command is activated |
How to reset my device?
| Perform a reset of my connected device | |
| # Press and hold the "SET" button on the motorization for 7 seconds. | |
| Press and hold the "SET" button | Hold the button for 7 seconds. |
| # The indicator will start blinking rapidly red. Release the button. The reset has been successfully completed. Your product is in factory mode | |
| The indicator blinks rapidly red | Release! The reset is done. The product returns to its factory settings. |