"Do you have questions? I am here to answer them.

What happens when no scenario is present in the "Scenarios" menu of the Enki app?
Well, the screen below appears.
To create your first scenario, you can:

• Click the "+" button at the top right of the screen (as shown above),
• Or click on " Add a scenario "  in the center of the screen."

"In this section, I will present the features and possibilities offered by your scenario.

Indeed, a scenario allows you to perform a wide range of actions and customize its operation according to your needs."

When creating your scenario, it is important to be able to identify it easily. For that, consider customizing the following option:

• These are one or more events that automatically trigger your scenario.
• If you add multiple triggers, activating any one of them is enough for the actions defined in the scenario to be executed.
• Triggers are optional: you can create a scenario without using any.

• Conditions correspond to one or more restrictions that must be met for your scenario to execute its actions.
• They do not trigger the scenario by themselves but allow the actions to execute when they are fulfilled.
• Thus, if a trigger activates the scenario while these conditions are not met, the actions will not be executed.
• Conditions are optional: you can create a scenario without defining any.

• When the scenario is executed, the defined actions take place in the order you chose (from top to bottom).
• You can change this execution order at any time to adapt the scenario flow according to your needs.

When creating your scenario, you also have access to the following option:

"This type of scenario is called a manual scenario. But what is a manual scenario?

A scenario is called manual when it requires a deliberate action to be launched, meaning it must be activated by yourself via the app, a button, a remote control, or a switch you have configured for this purpose."

1. Click the " + " button next to the label "Then" located on the right side of the screen.
2. Then select "Action on device" to access your list of devices.

1. Click the "Add an action" button below the label "Then".
2. Then select "Action on device" to access your list of devices.

1. Select your Equation air conditioner from the displayed list.
2. Then choose the desired option from the following:
   • On/Off
   • Advanced air conditioner configuration
3. Finally, select the desired state of your device among:
   • State: On / Off
   • Mode: Cool / Dry / Fan / Heat
   • Temperature: From 16°C to 30°C
   • Fan speed: Auto / High / Low / Medium

For this example, we will choose On/Off and On.

"How to add a new device or a new action to my scenario?

You just need to repeat the steps explained in the section "Add an action to your scenario", then in "Integrate your device's action"."

1. To save your scenario, click the "Save" button located at the bottom of your screen.
2. Once saved, your scenario will appear in the list in the "Scenarios" menu.

1. Click on the "" icon next to the scenario you just created.
2. A loading icon will briefly appear on this icon. "".
3. Then, the "" icon will reappear.
4. Verify that your devices respond correctly to the actions you configured.

1. Click the " + " button next to the label "Then" located on the right side of the screen.
2. Then select "Action on device" to access your list of devices.

1. Click the "Add an action" button below the label "Then".
2. Then select "Action on device" to access your list of devices.

1. Select your Equation air conditioner from the displayed list.
2. Then choose the desired option from the following:
   • On/Off
   • Advanced air conditioner configuration
3. Finally, select the desired state of your device among:
   • State: On / Off
   • Mode: Cool / Dry / Fan / Heat
   • Temperature: From 16°C to 30°C
   • Fan speed: Auto / High / Low / Medium

For this example, we will choose On/Off and On.

"Now that your device's action has been added to the scenario, we will add a waiting delay.
This delay triggers a new action a certain time after the first one.

This is especially useful for "scheduled" actions to which you do not want to associate a precise time."

1. Click the " + " button next to the label "Then", on the right side of the screen.
2. Then select "Waiting delay" to access the delay configuration page.
3. Indicate the time you want to wait before the next action triggers.
4. Confirm by clicking "Save" at the bottom of the screen.
5. The waiting delay will then appear below the first action in the "Then" list.

1. Click the "Add an action" button below the label "Then".
2. Then select "Waiting delay" to access the delay configuration page.
3. Indicate the time you want to wait before the next action triggers.
4. Confirm by clicking "Save" at the bottom of the screen.
5. The waiting delay will then appear below the first action in the "Then" list.

"What is the waiting delay?

The waiting delay is the time that passes between two actions in a scenario.
For example, if you define a first action on your device, then a three-hour delay, the next action will only execute three hours after the first.
It is a simple way to shift the execution of your scenario's actions in time."

1. Click " + " next to the label "Then" on the right side of the screen.
2. Then select "Action on device" to reach your list of devices.

1. Click "Add an action" below the label "Then" and the two other actions.
2. Then select "Action on device" to reach your list of devices.

1. Select your Equation air conditioner from the displayed list.
2. Then choose the desired option from the following:
   • On/Off
   • Advanced air conditioner configuration
3. Finally, select the desired state of your device among:
   • State: On / Off
   • Mode: Cool / Dry / Fan / Heat
   • Temperature: From 16°C to 30°C
   • Fan speed: Auto / High / Low / Medium

For this example, we will choose On/Off and Off.

1. To save your scenario, click the "Save" button located at the bottom of your screen.
2. Once saved, your scenario will appear in the list in the "Scenarios" menu.

1. Click the "" icon next to the scenario you just created.
2. A loading icon will appear briefly on this icon "".
3. Once loading is complete, the "" icon will appear, indicating the scenario is running.
4. Then verify that your devices respond correctly to the actions defined in the scenario.

"Can a scenario be modified while it is running?

No. Modification options are disabled when the scenario is running, as indicated by the message displayed on the screen.

To modify it, you must first stop it, either by clicking the "" icon, or by selecting "  Stop scenario  " from the scenario editing screen."

"This type of scenario is called a scheduled scenario. But what is a scheduled scenario?

A scenario is considered scheduled when it triggers automatically at a precise time or during a defined period, thanks to a time trigger. The actions planned in the scenario then execute without manual intervention."

1. Click the " + " button next to the label "When" on the right side of the screen.
2. Then select "Specific time" to access the time configuration page.
3. Click on "00:00", then adjust the time when the scenario should trigger, and confirm by pressing "  Ok  ".
4. Next, choose the days on which the scenario should run (by default, all days are selected).
5. Finally, click "  Save  " at the bottom of the screen to confirm.

1. Click on "Add a trigger" below the label "When".
2. Then select "Time of day" to access the time configuration page.
3. Adjust the time at which the scenario should trigger its actions by vertically sliding the hours and minutes.
4. Then select the days during which the scenario should run (by default, all days are selected).
5. Finally, confirm by clicking "  Save  " at the bottom of the screen.

"Can multiple time triggers be set within the same scenario?

Yes! Each time you add as a trigger in your scenario will trigger all the actions you have configured.
You just need to repeat the steps described in the section "Add a Trigger in Your Scenario" for each desired time."

1. Click the " + " button next to the label "Then" located on the right side of the screen.
2. Then select "Action on object" to access your objects list.

1. Click the button "Add an action" below the label "Then".
2. Then select "Action on object" to access your objects list.

1. Select your Equation air conditioner from the displayed list.
2. Then choose the desired option from the following:
   • On/Off
   • Advanced air conditioner configuration
3. Finally, select the desired state of your object among:
   • State: On / Off
   • Mode: Cool / Dry / Fan / Heat
   • Temperature: From 16°C to 30°C
   • Fan speed: Auto / High / Low / Medium

For this example, we will choose On/Off and On.

"How do I integrate a new object or a new action into my scenario?

You just need to repeat the steps explained in the section "Add Your Action in Your Scenario", then in "Integrate Your Object's Action"."

1. To save your scenario, click the " Save " button located at the bottom of your screen.
2. Once saved, your scenario will appear in the "Scenarios" menu list.

1. Click the icon "" next to the scenario you just created.
2. A loading icon will briefly appear on this icon. "".
3. Then, the icon "" will reappear.
4. Verify that your objects respond correctly to the actions you have configured.

"Warning, if you want your object to switch to another state at a different time, you must create a second scenario following the same construction method.

Otherwise, you can also use the method of separating actions by one or more delays within a single scenario. For this, please refer to the section "Actions on the Object with a Delay".."

1. Click the " + " button next to the label "When", on the right side of the screen.
2. Then select "Dawn / Dusk" to access the time configuration page.
3. Choose whether you want the scenario to trigger at dawn (morning) or dusk (evening).
4. Click on "00:00" to set the desired time offset, then confirm by clicking "  Ok  ".
5. Then select whether this offset should be applied "before" or "after" the chosen time. (For example, if you select "after" with an offset of 1 hour and dusk, the scenario will run 1 hour after sunset.)
6. Then choose the days on which the scenario should run (by default, all days are selected).
7. Finally, click "  Save  " at the bottom of the screen to confirm.

1. Click "Add a trigger" under the label "When".
2. Then select "Dawn / Dusk" to access the time editing page.
3. Choose whether you want the scenario to trigger at dawn (morning) or dusk (evening).
4. Adjust the desired delay with a positive or negative value, according to your previous selection. (For example, if you choose a positive delay of 01:00 and are on dusk, the scenario will run one hour after sunset.)
5. Then select the days during which the scenario should run (by default, all days are selected).
6. Finally, confirm by clicking "  Save  " at the bottom of the screen.

1. Click the " + " button next to the label "Then" located on the right side of the screen.
2. Then select "Action on object" to access your objects list.

1. Click the button "Add an action" below the label "Then".
2. Then select "Action on object" to access your objects list.

1. Select your Equation air conditioner from the displayed list.
2. Then choose the desired option from the following:
   • On/Off
   • Advanced air conditioner configuration
3. Finally, select the desired state of your object among:
   • State: On / Off
   • Mode: Cool / Dry / Fan / Heat
   • Temperature: From 16°C to 30°C
   • Fan speed: Auto / High / Low / Medium

For this example, we will choose On/Off and Off.

"How do I integrate a new object or a new action into my scenario?

You just need to repeat the steps explained in the section "Add Your Action in Your Scenario", then in "Integrate Your Object's Action"."

1. To save your scenario, click the " Save " button located at the bottom of your screen.
2. Once saved, your scenario will appear in the "Scenarios" menu list.

1. Click the icon "" next to the scenario you just created.
2. A loading icon will briefly appear on this icon. "".
3. Then, the icon "" will reappear.
4. Verify that your objects respond correctly to the actions you have configured.

"This type of scenario is called an event-driven scenario. But what is an event-driven scenario?

A scenario is considered event-driven when it triggers automatically due to a change in the state of an object.
In other words, an event changes the state of an object, this new status then triggering the actions defined in the scenario."

1. Click the " + " button next to the label "When", located on the right side of the screen.
2. Then select "Object state" to access the object selection page.

1. Click "Add a trigger" under the label "When".
2. Then select "Object state" to access the object selection page.

1. Select your Equation air conditioner from the displayed list.
2. Then choose the desired option from the following:
   • On / Off
   • Advanced air conditioner configuration
3. Finally, select the desired state of your object among:
   • State: On / Off
   • Measured temperature: Below X°C / Above X°C.

For this example, we will choose On/Off and On.

"Is it possible to integrate multiple states of my object to trigger a scenario?

Yes, it is absolutely possible. You can add multiple states for your object or for other objects.
To do this, simply repeat the steps explained in the sections "Add Your Object as a Trigger in Your Scenario" and "Integrate Your Object's State". However, be careful not to create a loop that would trigger the scenario continuously, which could cause malfunction in your installation."

1. Click the " + " button next to the label "Then", on the right side of the screen.
2. Then select "Action on object" to access your objects list.
3. Find the object you want to activate, then choose and confirm the action to perform.

1. Click "Add an action" under the label "Then".
2. Then select "Action on object" to access your objects list.
3. Find the object you want to activate, then choose and confirm the action to perform.

"How do I integrate a new object or a new action into my scenario?

You just need to repeat the steps explained in the section "Add Your Action in Your Scenario."

1. To save your scenario, click the " Save " button located at the bottom of your screen.
2. Once saved, your scenario will appear in the "Scenarios" menu list.

1. Click the icon "" next to the scenario you just created.
2. A loading icon will briefly appear on this icon. "".
3. Then, the icon "" will reappear.
4. Verify that your objects respond correctly to the actions you have configured.

1. Click the " + " button next to the label "When", on the right side of the screen.
2. Then select "Object state" to access the selection page.
3. Choose one of your objects, then define the desired state that will serve to trigger the scenario.

1. Click "Add a trigger" under the label "When".
2. Then select "Object state" to access your objects list.
3. Choose one of your objects, then define the state that will serve to trigger the scenario.

"Is it possible to integrate multiple states of one or more objects to trigger a scenario?

Yes, absolutely. You can add multiple states, whether they come from the same object or different objects.
To do this, simply repeat the steps described in the section "Add One of Your Objects as a Trigger in Your Scenario". ⚠️ However, be careful not to create a loop that would trigger your scenario continuously, which could cause malfunction in your installation."

1. Click the " + " button next to the label "Then", on the right side of the screen.
2. Then select "Action on object" to access your objects list.

1. Click "Add an action" under the label "Then".
2. Then select "Action on object" to access your objects list.

1. Select your Equation air conditioner from the displayed list.
2. Then choose the desired option from the following:
   • On/Off
   • Advanced air conditioner configuration
3. Finally, select the desired state of your object among:
   • State: On / Off
   • Mode: Cool / Dry / Fan / Heat
   • Temperature: From 16°C to 30°C
   • Fan speed: Auto / High / Low / Medium

For this example, we will choose On/Off and On.

"How do I integrate a new object or a new action into my scenario?

You just need to repeat the steps explained in the section "Add Your Object's Action in Your Scenario", then in  "Integrate Your Object's Action"."

1. To save your scenario, click the " Save " button located at the bottom of your screen.
2. Once saved, your scenario will appear in the "Scenarios" menu list.

1. Click the icon "" next to the scenario you just created.
2. A loading icon will briefly appear on this icon. "".
3. Then, the icon "" will reappear.
4. Verify that your objects respond correctly to the actions you have configured.

1. Click the " + " button next to the "When" label, located on the right side of the screen.
2. Then select "Device state" to access the device selection page.

1. Click on "Add a trigger" below the "When" label.
2. Then select "Device state" to access the device selection page.

1. Select your Equation air conditioner from the displayed list.
2. Then choose the desired option from the following:
   • On / Off
   • Advanced air conditioner configuration
3. Finally, select the desired state of your device from:
   • State: On / Off
   • Measured temperature: Less than X°C / Greater than X°C.

For this example, we will choose On/Off and On.

"Is it possible to integrate multiple states of my device to trigger a scenario?

Yes, it is absolutely possible. You can add multiple states for your device or for other devices.
To do this, simply repeat the steps explained in the sections "Add your device as a trigger in your scenario" and "Integrate your device's state". However, be careful not to create a loop that would continuously trigger the scenario, which could cause your setup to malfunction."

1. Click the " + " button next to the "Then" label, on the right side of the screen.
2. Then select "Notification" to access customization.
3. In the "Enter your message" field, click and write the message you want to receive in the notification.
4. Finally, confirm by clicking "  Save  " at the bottom of the screen.

1. Click on "Add an action" below the "Then" label.
2. Then select "Notification" to access customization.
3. In the "Enter your message" field, click and write the message you want to receive in the notification.
4. Finally, confirm by clicking "  Save  " at the bottom of the screen.

1. To save your scenario, click the " Save " button located at the bottom of your screen.
2. Once saved, your scenario will appear in the list under the "Scenarios" menu.

1. Click on the "" icon next to the scenario you just created.
2. A loading icon will briefly appear on this icon: "".
3. Then, the "" icon will reappear.
4. Check that you receive the notification you customized.

"If you experience difficulties with receiving notifications — such as delays or complete absence — I invite you to consult the following article, which might be helpful:

• How my phone settings work to properly receive notifications"

1. Click the " + " button next to the "When" label, on the right side of the screen.
2. Then select "Device state" to access the selection page.
3. Choose one of your devices, then set the desired state that will trigger the scenario.

1. Click on "Add a trigger" below the "When" label.
2. Then select "Device state" to access the list of your devices.
3. Choose one of your devices, then set the state that will trigger the scenario.

"Is it possible to integrate multiple states from one or more devices to trigger a scenario?

Yes, absolutely. You can add multiple states, whether from the same device or from different devices.
To do this, simply repeat the steps described in the section  "Add one of your devices as a trigger in your scenario". ⚠️ However, be careful not to create a loop that would continuously trigger your scenario, which could cause your setup to malfunction."

1. Click the " + " button next to the "Then" label, on the right side of the screen.
2. Then select "Action on device" to access the list of your devices.

1. Click on "Add an action" below the "Then" label.
2. Then select "Action on device" to access the list of your devices.

1. Select your Equation air conditioner from the displayed list.
2. Then choose the desired option from the following:
   • On/Off
   • Advanced air conditioner configuration
3. Finally, select the desired state of your device from:
   • State: On / Off
   • Mode: Cool / Dry / Fan / Heat
   • Temperature: From 16°C to 30°C
   • Fan speed: Auto / High / Low / Medium

For this example, we will choose On/Off and On.

"How do I integrate a new device or a new action into my scenario?

You just need to repeat the steps explained in the section "Add your device's action in your scenario", then in "Integrate your device's action"."

1. Click on "Add conditions" under the "And only if" label.
2. Click the " + " button next to the "Period" label, on the right side of the screen.
3. Press "Select a start time" at the top of the screen.
4. Choose the type among "Time", "Dawn" or "Dusk", then indicate the desired time or period.
5. Then press "Select an end time" just below the start time.
6. Also select the type among "Time", "Dawn" or "Dusk", then set the desired time or period.
7. You can then choose the days on which the scenario should run (by default, all days are selected).
8. Click " Save " at the bottom of the screen to confirm these conditions.
9. Finally, press the arrow at the top left to return to building your scenario.

1. Click on "Conditions" under the "And only if" label.
2. Click on "Add a period" under the "Periods" section.
3. Press "Start time" at the top of the screen.
4. Select the type among "Time", "Dawn" or "Dusk", then set the desired time or period.
5. Then press "End time", just below the start time.
6. Choose again the type among "Time", "Dawn" or "Dusk", then indicate the desired time or period.
7. Select the days on which the scenario should run (by default, all days are selected).
8. Click " Save " at the bottom of the screen to confirm the conditions.
9. Finally, press the arrow at the top left to return to building your scenario.

"How do I integrate a new condition into my scenario?

You just need to repeat the actions you performed in the section "Add a time period condition in your scenario"."

1. To save your scenario, click the " Save " button located at the bottom of your screen.
2. Once saved, your scenario will appear in the list under the "Scenarios" menu.

1. Click on the "" icon next to the scenario you just created.
2. A loading icon will briefly appear on this icon: "".
3. Then, the "" icon will reappear.
4. Check that your devices respond correctly to the actions you have configured.

1. Click the " + " button next to the "When" label, on the right side of the screen.
2. Then select "Specific moment" to access the schedule configuration page.
3. Click on "00:00", then adjust the time at which the scenario should trigger, and confirm by pressing "  Ok  ".
4. Then choose the days for scenario execution (by default, all days are selected).
5. Finally, click "  Save  " at the bottom of the screen to confirm.

1. Click on "Add a trigger" below the "When" label.
2. Then select "Time of day" to access the schedule configuration page.
3. Adjust the time at which the scenario should trigger its actions by vertically sliding the hours and minutes.
4. Then select the days on which the scenario should run (by default, all days are selected).
5. Finally, confirm by clicking "  Save  " at the bottom of the screen.

"Can multiple time triggers be defined in the same scenario?

Yes! Each time you add as a trigger in your scenario will trigger all the actions you have configured.
You just need to repeat the steps described in the section "Add a trigger in your scenario". for each desired time."

1. Click the " + " button next to the "Then" label located on the right side of the screen.
2. Then select "Action on device" to access the list of your devices.

1. Click the button "Add an action" below the "Then" label.
2. Then select "Action on device" to access the list of your devices.

1. Select your Equation air conditioner from the displayed list.
2. Then choose the desired option from the following:
   • On/Off
   • Advanced air conditioner configuration
3. Finally, select the desired state of your device from:
   • State: On / Off
   • Mode: Cool / Dry / Fan / Heat
   • Temperature: From 16°C to 30°C
   • Fan speed: Auto / High / Low / Medium

For this example, we will choose On/Off and On.

"How do I integrate a new device or a new action into my scenario?

You just need to repeat the steps explained in the section "Add your action in your scenario", then in "Integrate your device's action"."

1. Click on "Add conditions" under the "And only if" label.
2. Click the " + " button next to the "State" label, on the right side of the screen.
3. Then select "Device state".
4. Choose your device, then set its state.

1. Click on "Conditions" under the "And only if" label.
2. Click on "Add a state" under the "States" section.
3. Then select "Device state".
4. Choose your device, then set its state.

"How do I integrate a new condition into my scenario?

You just need to repeat the actions you performed in the section "Add an event-related condition in your scenario"."

1. To save your scenario, click the " Save " button located at the bottom of your screen.
2. Once saved, your scenario will appear in the list under the "Scenarios" menu.

1. Click on the "" icon next to the scenario you just created.
2. A loading icon will briefly appear on this icon: "".
3. Then, the "" icon will reappear.
4. Check that your devices respond correctly to the actions you have configured.

"Be careful, I want to warn you: if you want your device to switch to another state, or to the opposite state, at a different time, you will need to create a second scenario following the same construction method.

However, it is also possible to separate the actions by one or more delays within the same scenario you just created.
To learn more, I invite you to consult the corresponding section. "Actions on the device with a delay"."