How does my Inspire connected fan work in a scenario?

Summary:

This article explains how to use your device in a scenario and presents different options. Note that the examples provided do not cover all possibilities.

Introduction

How do I create one?

How to create a scenario

Android: iOS:
Android - Créer un scénario.gif iOS - Créer un scénario.gif

1. Open the Enki app by tapping its icon "Logo application Enki (petit).png".

2. Click "Scenarios" in the menu bar at the bottom.

3. To create a scenario, tap the "+" icon on the right.

What happens if no scenario appears in the "Scenarios" menu of the Enki app?
The screen below is displayed.
To create your first scenario, you can:

  • Click "Add a scenario" in the center of the screen.
  • Or click the "+" button in the upper-right corner (iOS only).
Android - Page scénarios vide..gif
Features
To learn about your scenario's features, click this link Flèche Enki 20px.png What are the features of a scenario?

 

Perform one or more actions with my device

This type of scenario, called a manual scenario, requires a deliberate action to start it, such as activation through the app, a button, a remote control, or a configured switch.

Click the step you want to view to display the explanations.

Action on one or more devices

Action on one or more devices

 

Add an action to your scenario.

Android - Ajouter une action (Etat objet).gif
  1. Click "+ Add an action" in the "Action" section.
  2. Then, choose "Action on device" to view your devices.

Integrate your device's action.

 
  1. Select your Inspire connected fan from the displayed list.
  2. Choose the desired option from the following:
    • Turn on / Turn off
    • Fan speed
    • Fan mode
    • Advanced lighting configuration
  3. Finally, select the desired state of your device from:
    • Status: On / Off
    • Function: Fan / Light
    • Fan speed: 0 to 6
    • Fan mode: Breeze / Manual
    • Brightness: 0 to 100%
    • White: 2750K / 3500K / 4000K / 5000K / 6500K

For this example, we will choose "Advanced lighting configuration" and "Status: On / Brightness: 50% / White: 2750K"

Aruba - Scénario - Android - Actions - Etat de l'objet.gif

How do I add a new device or action to my scenario?

Repeat the steps in the "Add an action to your scenario" and "Integrate your device's action" sections above.

 

Save the scenario.

Android - Sauvegarder le scénario (Action simple).gif
  1. To save, click the " ✔ " button on the right side of the screen.
  2. Your scenario will appear in the "Scenarios" menu after it is saved.

Test your scenario.

 
  1. Click the Play icon "Logo play..png" next to the scenario you created.
  2. A loading icon will briefly appear on this Play icon "Logo play..png".
  3. Then, the Play icon "Logo play..png" will reappear.
  4. Check that your devices respond correctly to the configured actions.
Android - Tester son scénario (Manuelle).gif

In the example, if your Inspire connected fan is set to "On / Brightness 50% / White 2750K" as action no. 1, the device will respond immediately when the scenario runs.

Action on the device with a delay

Actions on the device with a delay

 

Add the first action to your scenario.

Android - Ajouter une action (Etat objet).gif
  1. Click "+ Add an action" in the "Action" section.
  2. Then, choose "Action on device" to view your devices.

Integrate your device's first action.

 
  1. Select your Inspire connected fan from the displayed list.
  2. Choose the desired option from the following:
    • Turn on / Turn off
    • Fan speed
    • Fan mode
    • Advanced lighting configuration
  3. Finally, select the desired state of your device from:
    • Status: On / Off
    • Function: Fan / Light
    • Fan speed: 0 to 6
    • Fan mode: Breeze / Manual
    • Brightness: 0 to 100%
    • White: 2750K / 3500K / 4000K / 5000K / 6500K

For this example, we will choose "Turn on / Turn off" and "Status: On / Function: Light".

Aruba - Scénario - Android - Actions - Etat de l'objet.gif

After adding your device's action to the scenario, you need to insert a wait delay. This delay starts a new action a certain amount of time after the first one. This is useful for scheduled actions without a specific time.

 

Add the second action to your scenario.

Android - Ajouter une action (Délais d'attente).gif
  1. Click "+ Add an action" in the "Action" section.
  2. Choose "Wait delay" to configure the delay.
  3. Enter the wait time before the next action.
  4. Click "Save" at the bottom of the screen.
  5. The delay will appear below the first action in "Action".

What is a wait delay?

It is the time between two actions in a scenario. For example, a three-hour delay postpones the next action for three hours after the first one.

This allows you to delay the execution of actions over time.

In this example, a 3-hour delay (03:00:00) is set between the first and second actions.

Add the third action to your scenario.

 
  1. Click "+ Add an action" in the "Action" section.
  2. Then choose "Action on device" to view your devices.
Android - Ajouter une deuxieme action (Etat objet).gif
 

Integrate your device's second action.

Aruba - Scénario - Android - Actions - Etat de l'objet.gif
  1. Select your Inspire connected fan from the displayed list.
  2. Choose the desired option from the following:
    • Turn on / Turn off
    • Fan speed
    • Fan mode
    • Advanced lighting configuration
  3. Finally, select the desired state of your device from:
    • Status: On / Off
    • Function: Fan / Light
    • Fan speed: 0 to 6
    • Fan mode: Breeze / Manual
    • Brightness: 0 to 100%
    • White: 2750K / 3500K / 4000K / 5000K / 6500K

For this example, we will choose "Turn on / Turn off" and "Status: Off / Function: Light".

Save your scenario.

 
  1. Click the " ✔ " button on the right to save your scenario.
  2. Your saved scenario will appear in the "Scenarios" menu.
Android - Sauvegarder le scénario (Action multiples).gif
 

Test your scenario.

Android - Tester son scénario (3 actions).gif
  1. Click the Play icon "Logo play..png" next to the scenario you created.
  2. A loading icon briefly appears on this icon.
  3. When loading is complete, the Stop icon "Logo stop.png" indicates that the scenario is running.
  4. Check that your devices respond correctly to the scenario's actions.

Can a scenario be modified while it is running?

No. Modifications are disabled while it is running, as shown on the screen.

To modify a scenario, first stop it using the "" icon or by selecting "Stop the scenario" in the editor.

Android - Scénario en cours de fonctionnement.gif

In this example:

  • A first action changes the status of the Inspire connected fan to on (for the light),

  • A three-hour delay follows,

  • Then a second action changes the status of the same Inspire connected fan back to off (for the light).

During execution:

  • The device first changes to the light-on status,

  • A three-hour delay elapses,

  • Then the device changes status again to light off.

 

Schedule an action with my device

This type of scenario is called a scheduled scenario. What is a scheduled scenario?

A scheduled scenario starts automatically at a defined time or during a defined period through a time trigger, executing the actions without manual intervention.

Click the step you want to view to display the explanations.

Schedule at a specific time

Schedule at a specific time

 

Add a trigger to your scenario.

Android - Ajouter un déclencheur (Horaire fixe).gif
  1. Click "+ Add a trigger" in the "Trigger" section.
  2. Choose "Specific time" to configure the schedule.
  3. Click "00:00", set the scenario time, then confirm with "OK". (On iOS: Set the scenario time by sliding the hours and minutes vertically.)
  4. Select the days on which it will run (by default, all days are selected).
  5. Click "Save" to confirm.

The trigger time for your scenario depends on your home's settings (country, address), not your phone's time or your current location.

Can multiple time triggers be set in the same scenario?

Yes, each added time triggers all the actions in the scenario. Simply repeat the steps in the Add a trigger to your scenario section for each time.

Add your action to your scenario.

 
  1. Click "+ Add an action" in the "Action" section.
  2. Then, choose "Action on device" to view your devices.
Android - Ajouter une action avec un déclencheur.gif

 

Integrate your device's action.

Aruba - Scénario - Android - Actions - Etat de l'objet.gif
  1. Select your Inspire connected fan from the displayed list.
  2. Choose the desired option from the following:
    • Turn on / Turn off
    • Fan speed
    • Fan mode
    • Advanced lighting configuration
  3. Finally, select the desired state of your device from:
    • Status: On / Off
    • Function: Fan / Light
    • Fan speed: 0 to 6
    • Fan mode: Breeze / Manual
    • Brightness: 0 to 100%
    • White: 2750K / 3500K / 4000K / 5000K / 6500K

For this example, we will choose "Turn on / Turn off" and "Status: On / Function: Fan".

How do I add a new device or action to my scenario?

Simply repeat the steps in the "Add your action to your scenario" and "Integrate your device's action" sections.

Save your scenario.

 
  1. To save, click the " ✔ " button on the right side of the screen.
  2. Your scenario will then appear in the "Scenarios" menu.
Android - Sauvegarder le scénario (Déclencheur horaire).gif

 

Test your scenario.

Android - Tester son scénario (Déclencheur horaire).gif
  1. Click the Play icon "Logo play..png" next to the scenario you created.
  2. A loading icon will briefly appear on this Play icon "Logo play..png".
  3. Then, the Play icon "Logo play..png" will reappear.
  4. Check that your devices respond correctly to the configured actions.

In the example, the scenario starts at 8:30 AM, Monday through Friday.
At that time, your connected fan will perform the action of turning on its fan as action no. 1.

To change the status at another time, create a second scenario in the same way.

You can also group actions with delays in a single scenario. See the "Actions on the device with a delay" section for more information.

Schedule at sunrise or sunset

Schedule at sunrise or sunset

 

Add a trigger to your scenario.

Android - Ajouter un déclencheur (Soleil).gif
  1. Click "+ Add a trigger" in the "Trigger" section.
  2. Select "Dawn / Dusk" to configure the schedule.
  3. Choose whether to trigger at dawn (morning) or dusk (evening).
  4. Set the time offset with "+" or "-" (for example, a positive delay of 01:00 at dusk starts the scenario one hour after sunset).
  5. Select the days on which it will run (by default, every day).
  6. Click "Save" to confirm.

The dawn or dusk period used to trigger actions in your scenario depends on your home's settings, not your phone's time or your location.
The time used is defined by the country and mailing address in your home's settings.

Add your action to your scenario.

 
  1. Click "+ Add an action" under "Action".
  2. Then, choose "Action on device" to view your devices.
Android - Ajouter une action avec un déclencheur (Soleil).gif

 

Integrate your device's action.

Aruba - Scénario - Android - Actions - Etat de l'objet.gif
  1. Select your Inspire connected fan from the displayed list.
  2. Choose the desired option from the following:
    • Turn on / Turn off
    • Fan speed
    • Fan mode
    • Advanced lighting configuration
  3. Finally, select the desired state of your device from:
    • Status: On / Off
    • Function: Fan / Light
    • Fan speed: 0 to 6
    • Fan mode: Breeze / Manual
    • Brightness: 0 to 100%
    • White: 2750K / 3500K / 4000K / 5000K / 6500K

For this example, we will choose "Turn on / Turn off" and "Status: On / Function: Light".

How do I add a new device or action to my scenario?

Simply follow the steps in the "Add your action to your scenario" and "Integrate your device's action" sections.

Save your scenario.

 
  1. To save, click the " ✔ " button on the right.
  2. Your scenario will then be visible in the "Scenarios" menu.
Android - Sauvegarder le scénario (Déclencheur soleil).gif

 

Test your scenario.

Android - Tester son scénario (Déclencheur horaire).gif
  1. Click the Play icon "Logo play..png" next to the scenario you created.
  2. A loading icon will briefly appear on this Play icon "Logo play..png".
  3. Then, the Play icon "Logo play..png" will reappear.
  4. Check that your devices respond correctly to the configured actions.

In this example, the scenario activates one hour after dusk, Monday through Friday.
During this period, your Inspire connected fan will perform the action of turning on its light as the first action.

 

Perform one or more actions on my device after an event

This type of scenario is called an event-based scenario. But what is it?

An event-based scenario starts automatically when a device changes status.
In other words, an event changes the status of a device, which starts the scenario's actions.

Click the step you want to view to display the explanations.

My device triggers the action

My device triggers the action

 

Add your device as a trigger in your scenario.

Android - Ajouter un déclencheur (Objet).gif
  1. Click "+ Add a trigger" under "Trigger".
  2. Choose "Device status" to open the device selection page.

Integrate your device's status.

 
  1. Select your Inspire connected fan from the displayed list.
  2. Choose the desired option from the following:
    • On
    • Off
  3. Finally, select the desired status of your device from:
    • Fan
    • Light

For this example, we will choose "On" and "Fan".

Aruba - Scénario - Android - Déclencheur - Etat de l'objet.png

Can multiple statuses of a device be used to trigger a scenario?

Yes, you can add multiple statuses for one or more devices. Repeat the steps in the "Add your device as a trigger" and "Integrate your device's status" sections. Be careful to avoid loops that would trigger the scenario continuously, potentially disrupting your installation.

 

Add your action to your scenario.

Android - Ajouter une action avec un déclencheur (Objet).gif
  1. Click "+ Add an action" under "Action".
  2. Choose "Action on device" to view your devices.
  3. Select the desired device and confirm the action.

How do I add a new device or a new action to my scenario?

Simply repeat the steps explained in the "Add your action to your scenario" section.

Only devices eligible for an action are displayed in the list.
If a device does not appear, it cannot be used as an action or cannot execute an action.

For this example, we will use an air conditioner that will perform the action of turning on.

Save your scenario.

 
  1. To save, click the " ✔ " button on the right side of the screen.
  2. Your saved scenario will appear in the "Scenarios" menu.
Android - Sauvegarder le scénario (Déclencheur objet).gif

 

Test your scenario.

Android - Tester son scénario (Déclencheur horaire).gif
  1. Click the Play icon "Logo play..png" next to the scenario you created.
  2. A loading icon will briefly appear on the Play icon "Logo play..png".
  3. Then, the Play icon "Logo play..png" will reappear.
  4. Check that your devices respond correctly to the configured actions.

In the example, a specific status—fan on—is set for the Inspire connected fan to trigger the scenario.
When the Inspire connected fan is in this status, the action of turning on the air conditioner is triggered.

My device is controlled by a trigger

My device is controlled by a trigger

 

Add one of your devices as a trigger in your scenario.

Android - Ajouter un déclencheur (Objet).gif
  1. Click "+ Add a trigger" in the "Trigger" section.
  2. Select "Device status" to access the selection page.
  3. Choose a device and define the status that triggers the scenario.

Only devices that can be used as triggers appear in the list.
If a device is not visible, it is not compatible as a trigger in a scenario.

Can multiple statuses of one or more devices be used to trigger a scenario?

Yes, you can add multiple statuses from one or more devices.

Simply repeat the steps in the "Add a device as a trigger" section. ⚠️ Be careful not to create a loop that triggers the scenario continuously, which could cause a malfunction.

In this example, we will use a connected thermometer, with a measured temperature above 25°C, to trigger the scenario.

Add your device's action to your scenario.

 
  1. Click "+ Add an action" under "Action".
  2. Choose "Action on device" to view your devices.
20 - Android - Ajouter une action avec un déclencheur (Objet).gif

 

Integrate your device's action.

Aruba - Scénario - Android - Actions - Etat de l'objet.gif
  1. Select your Inspire connected fan from the displayed list.
  2. Choose the desired option from the following:
    • Turn on / Turn off
    • Fan speed
    • Fan mode
    • Advanced lighting configuration
  3. Finally, select the desired state of your device from:
    • Status: On / Off
    • Function: Fan / Light
    • Fan speed: 0 to 6
    • Fan mode: Breeze / Manual
    • Brightness: 0 to 100%
    • White: 2750K / 3500K / 4000K / 5000K / 6500K

For this example, we will choose "Turn on / Turn off" and "Status: On / Function: Fan".

How do I add a new device or action to my scenario?

Simply repeat the steps in the "Add your device's action to your scenario" and "Integrate your device's action" sections.

Save your scenario.

 
  1. To save, click the " ✔ " button on the right side of the screen.
  2. Your scenario will then appear in the "Scenarios" menu.
Android - Sauvegarder le scénario (Déclencheur objet).gif

 

Test your scenario.

Android - Tester son scénario (Déclencheur horaire).gif
  1. Click the Play icon "Logo play..png" next to the scenario you created.
  2. A loading icon will briefly appear on this icon.
  3. Then, the Play icon "Logo play..png" will reappear.
  4. Check that your devices respond correctly to the configured actions.

In the example, a specific status is defined for a device—the connected thermometer—to trigger the scenario: a detected temperature above 25°C.
When the device reaches this status, the action of turning on the fan in the scenario runs automatically.

 

Be notified when an event occurs with my device

Click the step you want to view to display the explanations.

Receive a notification when an event is associated with my device

 

Add your device as a trigger in your scenario.

Android - Ajouter un déclencheur (Objet).gif
  1. Click "+ Add a trigger" in the "Trigger" section.
  2. Select "Device status" to open the device selection page.

Configure your device's status.

 
  1. Select your Inspire connected fan from the displayed list.
  2. Choose the desired option from the following:
    • On
    • Off
  3. Finally, select your device's desired status from:
    • Fan
    • Light

For this example, we will choose "On" and "Fan".

Aruba - Scénario - Android - Déclencheur - Etat de l'objet.png

Can I use multiple device statuses to trigger a scenario?

Yes, you can add multiple statuses from one or more devices by repeating the steps in the "Add your device as a trigger" and "Configure your device's status" sections.

Be careful to avoid loops that could trigger the scenario continuously and potentially disrupt your installation.

 

Add the notification to receive to your scenario.

Android - Ajouter une action de notification.gif
  1. Click "+ Add an action" under the Action section.
  2. Choose Notification to customize it.
  3. Under Enter your message, write your message.
  4. Confirm by clicking "Save" at the bottom.

How many characters can I use in the notification message?

The message must contain between 1 and 160 characters. It cannot contain fewer or more characters.
You can also insert emojis into your message.

Save your scenario.

 
  1. To save, click the "✔" button on the right side of the screen.
  2. Your scenario will then appear in the "Scenarios" menu.
Android - Sauvegarder le scénario (Déclencheur objet - Notification).gif

 

Test your scenario.

Android - Tester son scénario (Notification).gif
  1. Click the Play icon "Logo play..png" next to your scenario.
  2. A loading icon will briefly appear on this icon.
  3. Then, the Play icon "Logo play..png" will reappear.
  4. Check that you received your customized notification.

In the scenario above, the trigger is that the Inspire connected fan is in the status where its fan is turned on.
When this status occurs, you will receive the configured customized push notification.

🔧 Assistance - Notification delivery issue (delayed or missing)

If you are having issues receiving notifications, such as delays or missing notifications, see this helpful article:

 

Allow my scenario to perform one or more actions under certain conditions

This type of scenario, called a conditional scenario, is triggered automatically if a device is in a given status when it runs.

In other words, if the device is in the desired status when the scenario runs through an automation, the actions are performed.

Click the step you want to view to display the explanations.

The scenario is conditioned by a time period

My scenario is conditioned by a time period

 

Add one of your devices as a trigger in your scenario.

Android - Ajouter un déclencheur (Objet).gif
  1. Click the "+ Add a trigger" button under the "Trigger" section.
  2. Then select "Device status" to access the selection page.
  3. Choose one of your devices, then set the desired status that will trigger the scenario.

Only devices that can be used as triggers are listed.
If a device does not appear, it is not compatible as a trigger in a scenario.

Can I use multiple statuses from one or more devices to trigger a scenario?

Yes, simply add multiple statuses from the same or different devices.
Repeat the steps in the "Add one of your devices as a trigger" section. ⚠️ Be careful to avoid loops that could trigger the scenario continuously and potentially disrupt your installation.

In this example, we will use the connected thermometer device, with a detected temperature above 25°C, to trigger the scenario.

Add your device's action to your scenario.

 
  1. Click "+ Add an action" under "Action".
  2. Choose "Action on device" to view your devices.
20 - Android - Ajouter une action avec un déclencheur (Objet).gif

 

Configure your device's action.

Aruba - Scénario - Android - Actions - Etat de l'objet.gif
  1. Select your Inspire connected fan from the displayed list.
  2. Choose the desired option from the following:
    • Turn on / Turn off
    • Fan speed
    • Fan mode
    • Advanced lighting settings
  3. Finally, select your device's desired status from:
    • Status: On / Off
    • Function: Fan / Light
    • Fan speed: 0 to 6
    • Fan mode: Breeze / Manual
    • Brightness: 0 to 100%
    • White: 2750K / 3500K / 4000K / 5000K / 6500K

For this example, we will choose "Turn on / Turn off" and "Status: On / Function: Fan".

How do I add a new device or action to my scenario?

Simply repeat the steps in the "Add your device's action" and "Configure your device's action" sections.

Add a time period condition to your scenario.

 
  1. Click "Add a condition" under "Condition (optional)".
  2. Click "+ Add a period" under "Periods" on the right.
  3. Select "Start time" at the top.
  4. Choose the type: "Time", "Dawn" or "Dusk", then the time or period.
  5. Select "End time", then the type and time or period.
  6. Choose the days of execution (every day by default).
  7. Click "Save" at the bottom to confirm.
  8. Tap the arrow in the upper-left corner to return to the scenario.
Android - Ajouter une condition (Période).gif

How do I add a new condition to my scenario?

Simply repeat the steps in the "Add a time period condition to your scenario" section.

In this example, the actions are performed only from 8:30 AM to 12:45 PM, Monday through Friday.
Outside this period, they do not run, even if the trigger is activated.

 

Save your scenario.

Android - Sauvegarder le scénario (Condition).gif
  1. To save, click the "✔" button on the right side of the screen.
  2. Your scenario will then appear in the "Scenarios" menu.

Test your scenario.

 
  1. Click the Play icon "Logo play..png" next to your scenario.
  2. A loading icon will briefly appear on this icon.
  3. Then, the Play icon "Logo play..png" will reappear.
  4. Check that your devices respond correctly to the configured actions.
Android - Tester son scénario (Déclencheur horaire).gif

In this example, a connected thermometer triggers the scenario when it detects a temperature above 25°C.
The scenario runs only between 8:30 AM and 12:45 PM, Monday through Friday.
Therefore, the action to turn on the fan will be triggered only if the status is reached during this time period.
Outside this period, the action does not run.

The scenario is conditioned by an event

My scenario is conditioned by an event

 

Add a trigger to your scenario.

Android - Ajouter un déclencheur (Horaire fixe).gif
  1. Click "+ Add a trigger" in the "Trigger" section.
  2. Choose "Specific time" to configure the schedule.
  3. Click "00:00", set the scenario time, then confirm with "OK". (On iOS: Set the scenario time by sliding the hours and minutes vertically.)
  4. Select the days of execution (all are selected by default).
  5. Click "Save" to confirm.

Your scenario's trigger time depends on your home's settings (country, address), not your phone's time or your current location.

Can I set multiple time triggers in the same scenario?

Yes, each added time triggers all the actions in the scenario. Simply repeat the steps in the Add a trigger to your scenario section for each time.

Add your action to your scenario.

 
  1. Click "+ Add an action" in the "Action" section.
  2. Then choose "Action on device" to view your devices.
Android - Ajouter une action avec un déclencheur.gif

 

Configure your device's action.

Aruba - Scénario - Android - Actions - Etat de l'objet.gif
  1. Select your Inspire connected fan from the displayed list.
  2. Choose the desired option from the following:
    • Turn on / Turn off
    • Fan speed
    • Fan mode
    • Advanced lighting settings
  3. Finally, select your device's desired status from:
    • Status: On / Off
    • Function: Fan / Light
    • Fan speed: 0 to 6
    • Fan mode: Breeze / Manual
    • Brightness: 0 to 100%
    • White: 2750K / 3500K / 4000K / 5000K / 6500K

For this example, we will choose "Advanced lighting settings" and "Status: On / Brightness: 100% / White: 5000K".

How do I add a new device or action to my scenario?

Simply repeat the steps in the "Add your action to your scenario" and "Configure your device's action" sections.

Add an event-related condition to your scenario.

 
  1. Click "Add a condition" under "Condition (optional)".
  2. Click "+ Add a status" under "Statuses" on the right.
  3. Select "Device status".
  4. Choose the device and set its status.
Android - Ajouter une condition (Etat objet).gif

How do I add a new condition to my scenario?

Simply repeat the steps in the "Add an event-related condition to your scenario" section.

In this example, the condition is that the door or window sensor is in the "closed" position, indicating that the window is properly closed.

 

Save your scenario.

Android - Sauvegarder le scénario (Condition etat objet).gif
  1. Click the "✔" button on the right to save your scenario.
  2. Your scenario will then appear in the "Scenarios" menu.

Test your scenario.

 
  1. Click the Play icon "Logo play..png" next to your scenario.
  2. A loading icon will briefly appear on this icon.
  3. Then, the Play icon "Logo play..png" will reappear.
  4. Check that your devices respond correctly to the configured actions.
Android - Tester son scénario (Déclencheur horaire).gif

The scenario is triggered at 8:30 AM from Monday through Friday.
At that time, your Inspire connected fan will turn its light on at 100% brightness in white at 5000K as action No. 1, only if the window is closed.
Otherwise, the action will not run.

To change your device's status at different times, create a second scenario in the same way.

You can also insert multiple actions with delays in a single scenario.
For more information, see the "Delayed device actions" section.

 

Things to know about scenarios

What are the limits on the maximum number of triggers?

Flèche Enki 20px.png You can include up to fifty triggers in a scenario.

What are the limits on the maximum number of conditions?

Flèche Enki 20px.png You can include up to fifty conditions in a scenario.

What are the limits on the maximum number of actions?

Flèche Enki 20px.png You can include up to fifty actions in a scenario.

What is the minimum delay accepted for a timer?

Flèche Enki 20px.png The delay must be at least five seconds.

Android:  iOS:
Délais d'attente Max - Android.png Délais d'attente Max - iOS.png
How many wait times can I include in my scenario?

Flèche Enki 20px.png You can add up to five delays in a scenario.

What is the maximum duration for a wait time?

Flèche Enki 20px.png On Android, the maximum delay is 23h59m59s. On iOS, it is 23h59m55s, with seconds in five-second increments.

How are the actions performed?

Flèche Enki 20px.png Actions are performed in the defined order, from top to bottom.
Change this order using the ↑↓ or "Move" buttons near the "Action" section.

Android:  iOS:
Android - Modifier l'ordre des actions.gif iOS - Modifier l'ordre des actions.gif
Why does my device not appear in the list of device statuses for triggers?

Flèche Enki 20px.png Not all devices can trigger a scenario. Check eligibility in the feature table on the product pages for Inspire fans.

Why does my device not appear in the conditions?

Flèche Enki 20px.png Only certain devices can limit the triggering of a scenario. Check eligibility on the product pages for Inspire fans.

Why does my device not appear in the actions?

Flèche Enki 20px.png Not all devices can perform an action in a scenario. Check eligibility on the product pages for Inspire fans.

Why doesn't my scenario always run when the value matches?

Flèche Enki 20px.png The trigger acts as a threshold: the scenario runs only when the value crosses it. If the value is already within the range, it does not trigger. Example: for threshold B, if the value goes from A to C by crossing B, the scenario runs; if it is already at C, it does not.

 

If you have any questions about your scenarios despite our tutorial, contact our technical support team. Please provide:

  • The make and model of your phones/tablets.
  • The devices and their names in the app that you want to integrate.
  • A clear description of your desired scenario.

The more details you provide, the more effective our support will be.


Related articles

Submit a request