This screen enables you to read the measurements from your Netatmo weather station. Here is the information you will find:
- Temperature: it is displayed in degrees Celsius.
- Humidity: it is displayed as a percentage (%).
- Noise (indoor module only): it is measured in decibels (dB) on a scale from 0 to 130. The audibility threshold is 0 dB and the pain threshold is 130 dB.
- Atmospheric pressure: it is displayed in millibars (mBar).
- CO2 (indoor module only): it is displayed in parts per million (ppm), a unit of measurement used to assess air pollution.
Related articles :
- Connected 3-in-1 motion, temperature and light detector
- Connected 3-in-1 Opening, Temperature and Brightness Detector
- Smoke detector
- Use a Door / Window Opening Detector - Lexman
- Using a 4-in-1 sensor (temperature, humidity, movement, opening)
- Using a leak, temperature and humidity sensor
- Using a Lexman leak detector with Enki
- Using a Lexman opening and vibration detector
- Using a motion detector
- Using a temperature and humidity sensor