* Prerequisites for the Enki app: Internet access and a phone with minimum operating system: Android: 7 / iOS: 15

Article content:

Technical description:

Type: Connected receiver for boiler.
Requires Enki box: Yes / Enki Box V1
State feedback: Yes
Size: 55 mm x 120 mm x 24 mm
Maximum device power: controlled 1150 W – 5 A
Features:
- ON/OFF control of the boiler
- Repeater function
Connection: To be connected to the boiler thermostat control input or to the circulator power supply
Cable section: Up to 2.5 mm²
Indoor use only
Operating temperature: 0 °C/+40 °C
Storage temperature: -20 °C/+70 °C
Power supply: 230 Vac / 50 Hz
Average consumption: < 1 W
Installation: surface wall mounting (anchors and screws provided)
Color: Sand / Pure white
Protection: IP20
Weight: 80 g
Radio profile:
- Radio protocol: EnOcean / Profile D2-O1-O1
- Radio frequency: 868.3 MHz
- Data rate: 125 kbit/s
- Modulation: ASK
- Transmission power: +5 dBm (EIRP)
- Radio range (Theoretical values provided by the manufacturer):
  - In open field: 30m
  - Masonry: 20m, through up to 3 walls
  - Reinforced concrete: 10m, through one wall/ceiling max.
  - Drywall/Wood: 30m, through up to five walls

Device functionality	Properties	Scenario integration
Device functionality	Properties	Actions	Triggers	Conditions
Turn On / Off	Product On - Off function	✔	✔	✔
Timer function: Turn off in / Turn on in	Set a time during the day to turn the device "OFF" or "ON"	✘	✘	✘
Timer function: Cancel timer	"STOP" the timer set for "Turn off in or turn on in"	✘	✘	✘
Programming	Set a start time and the device state Set an end time and the device state (optional) Choose execution days	✘	✘	✘

Module chaudière Avidsen - Vue du produit.png

Module chaudière Avidsen - Reset.png

How to reset.gif


Light on	Slow blinking	Blinks 10 times very quickly then turns off	Light off
Boiler on	Device settings	Pairing in progress. Pairing signal detected	Boiler off


Control page	Settings