Dio: Lighting Module - Product Sheet – Enki

Lighting micromodule	Two-way lighting micromodule

Type: Connected flush-mounted module for lighting. Requires Enki box: Yes / ENKI Box V1 State feedback: No Protocol: DiO 1.0 Frequency: 433.92 MHz Max Power: 3 mW EIRP Transmission range: 50 m (line of sight) Max. associated transmitters: 6 Operating temperature: -5 to 50°C Power supply: 220 - 240V 50 Hz Max.: Resistive load 20W - 250W LC loads (LED/ECO) 3W - 24W Dimensions: 43 mm x 41 mm x 13 mm Color: White Power: 200 Watts Use: Indoor only Control type: On/Off	Type: Connected flush-mounted modules for lighting (Two-way) Requires Enki box: Yes / ENKI Box V1 State feedback: No Transmission distance: 50 m (line of sight) Channels: micromodule (1 channel), transmitter (2 channels) Power supply: Micromodule: 230V 50 Hz Transmitter: Battery type: Lithium CR2032 3V Quantity: 1 Included: Yes Power: Max. 250W Dimensions: 47 mm x 47 mm x 20 mm Contents: On/Off micromodule, transmitter, manual Use: Indoor only Control type: On/Off Max. number of accessories: 6 Radio protocol: DiO 1.0 Radio frequency: 433.92 MHz 67 million codes

Flush-mounted lighting module	3-channel lighting module with waterproof box

Type: Connected flush-mounted lighting module Requires Enki box: Yes / ENKI Box V1 State feedback: No Color: White Max Power: 1000W / 5A Use: Indoor only Transmission distance: 50 m (line of sight) Mounting: Flush-mounted Voltage: 230V Radio protocol: DiO 1.0 Radio frequency: 433.92 MHz EIRP: 3 mW Contents: 1 flush-mountable on/off 1000W lighting module Dimensions: 48 mm x 48 mm x 24.5 mm Power supply: 220 – 240 V ~ 50Hz Operating temperature: 0 to 35°C Max. 32 associated transmitters	Type: Connected flush-mounted lighting module Requires Enki box: Yes / ENKI Box V1 State feedback: No Transmission distance: 50m (line of sight) Protection rating: IP44 & IP56 (Protection against water splashes and water jets from all directions with a lance) Contents: 1 flush-mountable 3-channel on/off 3500W module and a waterproof box with cable glands and fasteners. Color: White Max. number of accessories: 3x6 Power: 3500W / 5A Radio protocol: DiO 1.0 Radio frequency: 433.92 MHz Use: Indoor or Outdoor

Connect Rev Light Switch for lighting

Type: Connected switch for lighting Requires Enki box: Yes / ENKI Box V1 State feedback: No Radio protocol: DiO 1.0 + Wi-Fi (The Wi-Fi part is not compatible with ENKI, only DiO One not compatible with ENKI) Radio frequencies: 433.92 MHz + 2.4 GHz Transmission range: 50m (line of sight) Power supply: 220 - 240V - 50 Hz Voltage: 100W Operating temperature: 0 to 35°C Indoor use: IP20 EIRP: max. 0.7 mW Dimensions: 85 mm x 85 mm x 37 mm Connection: wired Control type: On / Off

Object functionality	Properties	Scenario integration
Object functionality	Properties	Actions	Triggers	Conditions
Turn On / Off	Product "ON" - "OFF" function	✔	✘	✘
Timer function: Turn off in / Turn on in	Set a time during the day to turn the device "OFF" or "ON"	✘	✘	✘
Timer function: Cancel timer	"STOP" the timer set for "Turn off in or turn on in"	✘	✘	✘
Scheduling	Set a start time and device state Set an end time and device state (optional) Choose execution days	✘	✘	✘


Control page	Settings

Lighting micromodule	Two-way lighting micromodule


Flush-mounted lighting module	3-channel lighting module with waterproof box


Connect Rev Light Switch for lighting

Lighting micromodule

Red LED flashes slowly after a button press	Red LED flashes slowly then stops and bulb flashes twice.
Searching for receiver pairing signal in progress.	Signal reception confirmation during search

Two-way lighting micromodule

Lights up red for two seconds after pressing the switch.
The transmitter sends a frame to the DiO micromodule to toggle its state. (Note! The transmitter does not connect directly to the Enki box, but to the DiO lighting micromodule)

Flush-mounted lighting module

Red LED flashes slowly after a button press	Red LED flashes slowly then stops and bulb flashes twice.
Searching for receiver pairing signal in progress.	Signal reception confirmation during search

3-channel lighting module with waterproof box

Red LED flashes slowly after a button press	Red LED flashes slowly then stops and bulb flashes twice.
Searching for receiver pairing signal in progress.	Signal reception confirmation during search

Connect Rev Light Switch for lighting
Switch states that are linked to the Enki ecosystem:

Yellow slow blinking	Yellow fast blinking for two seconds	Solid white
433 MHz listening mode activated Ready to pair or unpair a new input (Home automation box or 433.92 MHz remote control)	Command detected after entering listening mode Confirmation of pairing or unpairing of the home automation box or 433.92 MHz remote control	Switch is in "ON" mode (On)

Switch states that are not linked to the Enki ecosystem:

Red fast blinking	Solid red	Blue blinking	Solid blue then solid white	Solid purple	Green blinking
Wi-Fi listening mode activated Ready to connect the switch to a Wi-Fi network via the native app	Disconnected Switch is not connected to Wi-Fi via the native app	Connected Switch is properly connected to Wi-Fi via the native app	Connected Solid blue indicates the switch is properly connected to the cloud via the native app. After a few seconds, it changes to solid white	Switch Wi-Fi is disabled	Connected Update in progress via the native app