Prerequisites for installation and use :

• Enki Application*

* Prerequisites for the Enki application: Internet access and a phone with minimum operating system: Android: 7 / iOS: 15

Communication protocol:

• Wi-Fi
• Bluetooth*

* Bluetooth: The function is used only for pairing the product.

Available countries:

• France
• Spain
• Greece
• Italy
• Poland
• Portugal
• Romania

State feedback available: 

• Yes

Alexa voice control: 

• No

Google Home voice control: 

• No

Article content:

• Technical description

• Product functionality in the ENKI application

• Product view

• What does my product's LED status mean?

• How does... my device work?

• How to reset my device?

• Technical documents / user manual

Technical description:

• Type: Flexible solar panel kit with connected inverter
• Requires Enki box: No
• State feedback: Yes
• Use: Outdoor
• Kit contents:
  • 4 solar panels
  • 1 Connected micro-inverter
  • 1 AC (Alternating Current) cable
  • 1 DC (Direct Current) cable
  • 2 2-to-1 branch connectors
  • 34 Fixing clamps
• Total area: 2.52 m²
• Power: 440 W

Solar panel:

• Max power (Pmax): 110W
• Max power voltage (Vmp): 16.63 V
• Max power current (Imp): 6.66 A
• Open circuit voltage (Voc): 20.21 V
• Short circuit current (Isc): 6.94 A
• Module efficiency: 17.46 %
• Max system voltage: 600 V
• Max series fuse rating: 15 A
• Protection class: Class II
• Solar panel dimensions:
  • Thickness: 3 mm
  • Width: 630 mm
  • Length: 1000 mm
• Weight: 2.2 Kg
• Protection rating: IP68
• Output cable: 4 mm²
• Cable length: 700 mm
• Connector: MC4 compatible
• Technology: Perc
• Materials: PVDF + PET
• Production capacity over 25 years: 84.8 % (Value calculated according to IEC61215:2016 standard)
• Recommended maximum series/parallel configurations for modules: Two modules connected in series then in parallel
• Temperature coefficient of Pmax: -0.35 % / °C
• Temperature coefficient of Voc: -0.25 % / °C
• Temperature coefficient of Isc: +0.050 % / °C

Micro-inverter:

• Maximum operating altitude: 2000 m
• Cooling mode: Natural cooling
• Pollution degree: 2
• Environmental category: Outdoor and indoor
• Inverter insulation: High frequency isolated
• Weight: 1.85 Kg
• Dimensions:
  • Width: 163.3 mm
  • Height: 216.3 mm
  • Depth: 35.5 mm
• Bluetooth:
  • Frequency band: 2402 - 2480 MHz
  • Max radio emission: 20 dBm
• Wi-Fi:
  • Frequency band: 2412 - 2472 MHz
  • Max radio emission: 20 dBm

DC Cable:

• Cable length: 2000 mm
• Cross section: 4 mm²
• Ingress protection: IP68

AC Cable:

• Cable length: 5000 mm
• Cross section: 1.5 mm²

2-to-1 Branch Connector:

• Cable length: 300 mm
• Cross section: 4 mm²
• Ingress protection: IP 68

Fixing clamp: 

• Dimensions:
  • Width: 4.5 mm
  • Length: 300 mm
• Material: 304 SUS
• Color: Black

To pair the device, your Wi-Fi network must be configured with WPA2 on the 2.4 GHz frequency.
If your 2.4 GHz Wi-Fi network is mixed with 5 GHz, 6 GHz, or 7 GHz frequencies, it is imperative to separate the bands and assign a distinct SSID (Wi-Fi network name) to each frequency.

Product functionality in the ENKI application:

Control page	Settings

Product view:

* Grounding: Optional grounding. Connect the ground wire by screw in the dedicated hole.

* AC: Alternating current

* DC: Direct current.

What does my device's LED status mean:

Off.	Continuously blinking red.	Blinks green once every ten seconds.	Solid red.
Not producing energy. The power produced by the solar panels is not sufficient to power the micro-inverter.	Not producing energy. The micro-inverter does not have enough sunlight to start. Either because it is too early or too late in the day for the kit to produce energy, or because the kit is not receiving sunlight.	Producing energy. The micro-inverter is producing energy, enjoy your kit!	Error! Not connected, not producing energy. The micro-inverter has encountered a problem. Try resetting it and pairing it again. If the problem persists, contact your local dealer.

* The main inverter indicator does not indicate the connection status with your network and the application.

* It is impossible to connect the micro-inverter to your Wi-Fi network and the application if it is not properly powered and not producing energy. To be able to pair your micro-inverter, it must produce energy.

How does... my device work?

How does the pairing of my Lexman solar panel work

How to reset my device?

Perform a reset of my connected device
# Check that your micro-inverter is properly powered (If not, the reset will not proceed correctly). It should blink green (either continuously or once every ten seconds). Unplug and plug back the AC plug from your wall socket three times.
Make sure the indicator blinks green.	Unplug and plug back the AC plug into your wall socket 3 times
# The micro-inverter will blink red to indicate it is resetting, then it will flash red-green. Finally, it will return to its electricity production mode with a green blink every ten seconds. Your micro-inverter is reset.
The micro-inverter blinks red, then red-green before turning off	Then it blinks green every 10 seconds. The micro-inverter is in pairing mode. Reset successful

Technical documents / user manual