Prerequisites for installation and use:

• Enki Application*

* Prerequisite for the Enki application: Internet access and a phone with minimum operating system: Android: 7 / iOS: 15

Communication protocol:

• Wi-Fi
• Bluetooth*

* Bluetooth: This function is used only for product pairing.

Available countries:

• France
• Spain
• Greece
• Italy
• Poland
• Portugal
• Romania

State feedback available: 

• Yes

Alexa voice control: 

• No

Google Home voice control: 

• No

Article contents:

• Technical description

• Product functionality in the ENKI application

• Product view

• What does the LED status of my product mean?

• How does... my device work?

• How to reset my device?

• Technical documents / user manual

Technical description:

• Type: Rigid solar panel kit with connected inverter
• Requires Enki box: No
• State feedback: Yes
• Usage: Outdoor
• Kit contents:
  • 4 solar panels
  • 1 Connected micro-inverter
  • 1 AC (Alternating Current) cable
  • 1 DC (Direct Current) cable
  • 4 mounting supports
  • 4 T-fixings
  • 2 fixing screws for the micro-inverter
• Total surface area: 2.43 m²
• Power: 440 W

Solar panel:

• Max power (Pmax): 110W
• Voltage at max power (Vmp): 9.34 V
• Current at max power (Imp): 11.77 A
• Open circuit voltage (Voc): 10.96 V
• Short circuit current (Isc): 12.46 A
• Module efficiency: 18.08 %
• Max system voltage: 1500 V
• Max fuse rating in series: 20 A
• Protection class: Class II
• Solar panel dimensions:
  • Thickness: 25 mm
  • Width: 780 mm
  • Length: 780 mm
• Weight: 7 Kg
• Protection rating: IP67
• Output cable: 4 mm²
• Cable length: 650 mm
• Connector: MC4 compatible
• Technology: Perc
• Number of diodes: 2
• Materials:
  • Front: 3.2 mm tempered glass (0.13 inches)
  • Frames: Anodized aluminum alloy, black
• Optimal module series/parallel configurations: 4 modules in series
• Temperature coefficient of Pmax: -0.38 % / °C
• Temperature coefficient of Voc: -0.36 % / °C
• Temperature coefficient of Isc: +0.07 % / °C

Micro inverter:

• Maximum operating altitude: 2000 m
• Relative humidity: 0-100 %
• Cooling method: Natural cooling
• Pollution degree: 2
• Environmental category: Outdoor and indoor
• Inverter isolation: High frequency isolated
• Weight: 1.85 Kg
• Dimensions:
  • Width: 163.3 mm
  • Height: 216.3 mm
  • Depth: 35.5 mm
• Bluetooth:
  • Frequency band: 2402 - 2480 MHz
  • Maximum radio emission: 20 dBm
• WiFi:
  • Frequency band: 2412 - 2472 MHz
  • Maximum radio emission: 20 dBm
• Max DC input: 60 V
• Isc PV (absolute maximum): 25 A
• Operating range: 16-60 V
• Input current: 14 A
• MPPT voltage range: 22-50 V
• Nominal output voltage: 220/230 V~
• Output voltage range: 189-260 V~
• Output current (max. continuous): 1.81 A
• Frequency: 50/60 Hz
• Max feedback current from inverter to grid / AC or DC A: 0 A
• Starting current / AC A (peak and duration): 3.78A (50μs) A / μs
• Max output fault current / VAC A (peak and duration), or RMS: 1.9A (60ms) A / ms
• Max overcurrent protection at output / AC A:
  • MAX: 8.73 A
  • RMS: 6.17 A
• Power (max. continuous): 400 W
• Nominal power factor (default): -0.9 / +0.9
• Power factor / Nominal (default): 0.90 +/-
• Total harmonic distortion: <3 %
• Maximum efficiency: 96.5 %
• MPPT efficiency: 99.9 %
• Nighttime power consumption: < 100 mW
• Communication: PLCC (Power Line Carrier Communication) / WiFi
• Ingress protection: IP67
• Protection class: Class I
• Operating temperature: -40 / 65 °C
• Surge category: OVC III (AC Main), OVC II (PV)

DC cable:

• Cable length: 2500 mm
• Cross-section: 4 mm²
• Ingress protection: IP68

AC cable:

• Cable length: 5000 mm
• Cross-section: 1.5 mm²

Fixture:

• Dimensions (L*W):
  • Length: 734 mm
  • Width: 760 mm
  • Height: 50 mm
• Weight: 0.6 kg
• Color: Black Oxidation
• Material: Aluminum 5052/6063

To pair the device, your Wi-Fi network must be configured with WPA2 on the 2.4 GHz frequency.
If your 2.4 GHz Wi-Fi network is mixed with 5 GHz, 6 GHz, or 7 GHz frequencies, it is essential to separate the bands and assign a distinct SSID (Wi-Fi network name) to each frequency.

Product functionality in the ENKI application:

Control page	Settings

Product view:

* Grounding: Optional grounding. Connect the ground wire by screw in the dedicated hole.

* AC: Alternating current

* DC: Direct current.

What does the LED status of my device mean:

Off.	Flashing red continuously.	Flashes green once every ten seconds.	Solid red.
Not connected. Not producing energy. The power produced by the solar panels is not sufficient to power the micro-inverter.	Not connected. Not producing energy. The micro-inverter does not have enough sunlight to start. Either because it is too early or too late in the day for the kit to produce energy, or because the kit is not receiving sunlight.	Connected, producing energy. The micro-inverter is producing energy, enjoy your kit!	Error! Not connected, not producing energy. The micro-inverter has encountered a problem. Try resetting it and pairing it again. If the problem persists, contact your local dealer.

* The main inverter light does not indicate the connection status with your network and application.

* It is impossible to connect the micro-inverter to your Wi-Fi network and application if it is not properly powered and not producing energy. To pair your micro-inverter, it must produce energy.

How does... my device work?

How does the pairing of my Lexman solar panel work

How to reset my device?

Perform a reset of my connected device
# Check that your micro-inverter is properly powered (If not, the reset will not proceed correctly). It should flash green (either continuously or once every ten seconds). Unplug and plug back the AC plug from your wall socket three times.
Make sure the light flashes green.	Unplug and plug back the AC plug into your wall socket 3 times
# The micro-inverter will flash red to indicate it is resetting, then it will flash red-green. Finally, it will return to its electricity production mode with a green flash every ten seconds. Your micro-inverter is reset.
The micro-inverter flashes red, then red-green before turning off	Then it switches to green flashing every 10 sec. The micro-inverter is in pairing mode. Reset successful

Technical documents / user manual