This guide walks you through the step-by-step process of resetting a Nodon module (for radiator or water heater) to restore its factory settings. This procedure is ideal for resolving communication issues.
🛠️ Reset Guide
- Make sure the module is powered on
- Then press and hold the module's single button for a full 10 seconds until the LED starts blinking orange
- To confirm the reset, briefly press the module's button again just after the orange blinking. You will know the operation was successful when the LED alternates blinking red and green, then ends with a steady orange blink.
- Your device has completed its reset and is ready to join a new Zigbee network