The "Indoor Camera Live" screen allows you to control and interact with your camera from your Enki app.
Video display
View the live feed from your camera. For a more immersive experience, you can enlarge the display to full screen by pressing the "Expand" icon or by rotating your phone to landscape.
Menu - Main features
- Privacy mode: The camera goes in standby mode, the video and audio streams are cut off, the LED switches off, and the lens turns towards the base. You can program this mode according to your needs from the camera "Settings" page.
- Baby care mode: Only sound detection is active, the video stream is off. This mode can't be used with the privacy mode or the motion detection.
- Motion tracking mode: The camera follows movements on the horizontal axis without triggering notifications or recordings. Not available when the camera is fixed to a wall.
- Motion detection mode: Receive notifications and recordings if movement is detected.
Microphone - Talk through your camera
- Access the microphone icon from the control screen.
- Press the center button to activate and start speaking.
- Release the button when you're done.
Photo - Capture a picture
- Tap the camera icon then the center button to take a shot. The picture will be saved in your gallery.
Video - Record a clip
- Tap the record icon then the center button to start. The recording will stop after 3 minutes or if you leave the screen.
Control the camera
- Use the virtual joystick to orientate the camera as needed. A slight latency may occur depending on your internet connection.
History
- With an SD card inserted, you can access past recordings directly from the app.
Notes : Using some features requires authorization to access your phone's microphone and storage. Also make sure that your device's memory is not full to allow recordings and captures.