Requirements for installation and use:
- Enki App* + Enki Box or Enki Connect Box / Essentiel b Connect Box
* Requirements for the Enki app: Internet access and a phone with minimum operating system: Android: 7 / iOS: 15
Communication protocol:
- Zigbee + Bluetooth*
* If the device is connected via Bluetooth, the functions available through the Enki app are limited. See the article Why can't my Bluetooth device be controlled via voice assistants (Alexa/Google Home) or through scenarios? for more details.
Available countries:
- France**
- Spain
- Greece
- Italy
- Poland
- Portugal
- Romania
**Essentiel b Connect Box available only in France
State feedback available:
- Yes
Alexa voice control:
- Yes
Google Home voice control:
- Yes
Article contents:
Technical description
Product functionality in the ENKI app
Product view
How does my device visually respond in different situations?
How to use my device without the Enki app?
How to reset my device?
Technical documents / user manual
Technical description:
- Type: Connected ceiling speaker light
- Requires ENKI box: Yes / ENKI Box V1 - ENKI Connect Box
- State feedback: Yes
- Radio protocol: Zigbee (IEEE 802.15.4) / Bluetooth
- Radio frequency: 2402 MHz-2480 MHz
- Nominal voltage: 220-240V
- Nominal frequency: 50/60 Hz
- Power consumption in standby mode: 0.5 W
- Equivalent to a product: 262W / 292W / 352W
- Max. radio power level 10 dBm
- Protection rating: IP44
- Use: Indoor
- Shape: Round
- Product color: White
- Bulb type: Integrated LED
- Color temperature: From 2700K to 6500K
- Light color: RGB color change | Warm white to cool white change
- Compatible with dimmer: No
- Light intensity dimming: Yes
- Protection class: 2 - electrical appliance with double insulation
- Compatible with voice assistant: Yes / Alexa and Google Home (Only in Zigbee mode)
- Object size: 170 mm x 170 mm x 6.50 mm / 115 mm x 115 mm x 6.50 mm / 125 mm x 125 mm x 6.50 mm
- ⚠️ The connected speaker part is not managed in ENKI and is independent of the app or boxes.
Product functionality in the ENKI app:
| Device functionality | Properties | Scenario integration | ||
| Actions | Triggers | Conditions | ||
| Turn on / Turn off | Product "ON" - "OFF" function | ✔ | ✔ | ✔ |
| Change color / Hue / Saturation | Changes the color emitted by the bulb | ✔ | ✘ | ✘ |
| Change white temperature |
White temperature: From 2200K to 6500K (Golden yellow / Light yellow / Warm white / Neutral white / Cool white / Cold white / Bright white / Brilliant white / Light blue / Cold blue) |
✔ | ✘ | ✘ |
| Change brightness level | Min: 0% / Max: 100% / Step: 1% | ✔ | ✘ | ✘ |
|
Timer function: Turn off in / Turn on in |
Set a time during the day to turn the device "OFF" or "ON" | ✘ | ✘ | ✘ |
|
Timer function: Cancel timer |
"STOP" the timer set for "Turn off in" or "Turn on in" |
✘ | ✘ | ✘ |
| Scheduling |
Set a start time and device state Set an end time and device state (optional) Choose execution days |
✘ | ✘ | ✘ |
|
|
||
| Device in Bluetooth (Limited functions) | Device in Zigbee on Enki box (Full functions) | Settings |
| Control page | ||
Product view:
How does my device visually respond in different situations?
|
Bulb in factory mode / reset, ready for pairing. Cycles through white / red / green / blue, then stays on solid white (Not associated with any device) |
Bulb detects a signal. Flashes once upon signal detection (Pairing signal from a device) |
Bulb paired. (Associated with a device) |
How to use my device without the Enki app?
You must have the Lexman lighting remote control (Gray) in order to control your bulb without the Enki app.
How to reset my device?