Inspire : Spot EXTRAFLAT - Product Sheet

Spot à encastrer connecté Extraflat Enki led, couleurs et blancs, D8,5 blanc - 6

Séparateur horizontale vert.png

Prerequisites for installation and use :

* Prerequisites for the Enki application: Internet access and a phone with minimum operating system: Android: 7 / iOS: 15

Communication protocol:

  • Zigbee + Bluetooth*

* If the device is connected via Bluetooth, the functions available through the Enki application are limited. See the article Why is my Bluetooth device not controllable via voice assistants (Alexa/Google Home) or via scenarios? for more details.

Available countries:

  • France**
  • Spain
  • Italy
  • Poland
  • Portugal

**Essentiel b Connect Box available only in France

State feedback available: 

  • Yes

Alexa voice control : 

  • Yes

Google Home voice control : 

  • Yes

Séparateur horizontale vert.png

Article contents:

 

Technical description:

  • Type: Connected color and white ceiling light panel
  • Requires ENKI box: Yes / ENKI Box V1 - ENKI Connect Box
  • State feedback: Yes
  • Radio protocol: Zigbee (IEEE 802.15.4) / Bluetooth
  • Energy consumption in ON mode: 16 kWh / 1000h
  • Energy efficiency class: D
  • Power in ON mode: 15.2 W
  • Usage: Indoor
  • Color temperature: From 2700K to 6500K
  • Light color: RGB color change | Change from warm white to cool white
  • Light intensity dimming: Yes
  • Voice assistant compatible: Yes / Alexa and Google Home (Only in Zigbee mode)

Product functionality in the ENKI application:

Device functionality Properties Scenario integration
Actions Triggers Conditions
Turn On / Off Product "ON" - "OFF" function ✔ ✔ ✔
Change color / Hue / Saturation Changes the color emitted by the bulb ✔ ✘ ✘
Change white temperature

White temperature: From 2200K to 6500K

(Golden yellow / Light yellow / Warm white / Neutral white / Cool white / Cold white / Bright white / Brilliant white / Light blue / Cold blue)

 ✔ ✘ ✘
Change brightness level Min: 0% / Max: 100% / Step: 1% ✔ ✘ ✘

Timer function:

Turn off in / Turn on in

 Set a time during the day to turn the device "OFF" or "ON" ✘ ✘ ✘

Timer function:

Cancel timer

"STOP" the timer set for "Turn off in or Turn on in"

 ✘ ✘ ✘
Scheduling

Set a start time and the device state

Set an end time and the device state (optional)

Choose the days of execution

 ✘ ✘ ✘
Ampoule Zibee rgb - Card N2 BT.png Ampoule Zibee rgb - Card N2 01.png Ampoule Zibee rgb - Card N2 02.png Ampoule Zibee rgb - Card N2 03.png Lexman éclairage lumia filaire - Minuteur.png Programmation 01.png Programmation 02.png Ampoule Zibee rgb - Card N3.png
Device in Bluetooth (Limited functions) Device in Zigbee on Enki box (Full functions) Settings
Control page

 

Product view:

Spot Extraflat - Vue du produit.png

 

How does my device visually react in different situations?

Objet - Voyants.gif Ampoule clignote une fois lors de la détection de signal (Ampoule Zigbee).gif Ampoule allumée blanc chaud.png

Bulb in factory mode / reset, ready for pairing.

Performs a white / red / green / blue cycle, then stays on steady white

(Not associated with any device)

Bulb detects a signal.

Blinks once upon signal detection

(Pairing signal from a device)

Bulb paired.

(Associated with a device)

 

How to use my device without the Enki application?

You must have the Lexman lighting remote control (Gray) in order to control your bulb without the Enki application. 

Sans titre-1.png

How to use lexman gris rgb.gif

 

How to reset my device?

Ampoule RGB Zigbee - Reset.png

How to reset ampoule rgb zigbee.gif

Réinitialiser spot rgb zigbee.gif

 

Technical documents / user manual

Related articles

Submit a request