Prerequisites for installation and use :
- Enki App* + Enki Box or Enki Connect Box / Essentiel b Connect
* Prerequisites for the Enki app: Internet access and a phone with minimum operating system: Android: 7 / iOS: 15
Communication protocol:
- Zigbee
Available country:
- France
State feedback available :
- Yes
Alexa voice control :
- Yes
Google Home voice control :
- Yes
Article contents:
Technical description
Product functionality in the ENKI app
Product view
How does my device visually react in different situations?
How to use my device without the Enki app?
How to reset my device?
Technical documents / user manual
Technical description:
- Type: Connected bulb
- Requires Enki box: Yes / ENKI Box V1 - ENKI Connect Box
- State feedback: Yes
- Radio protocol: Zigbee
- Radio frequency: 2405-2480 MHz
- Max radio power: 10 dBm
- Radio profile: IEEE 802.15.4
- Operating temperature: -20~+40°C
- Storage temperature: -20~+60°C
- Standby power consumption: < 0.5 W
- Base type: E14, E27
- Voltage: 220-240V
- Protection rating: IP20
- Light color: Color changing
- Light intensity dimming: Yes
- Main material: Plastic
- Technology: LED
- Glass finish: Frosted
- Ignition type: Instant
- Bulb beam angle: 220°
- Lifespan: 15000h
- Color temperature: From 2700 to 6500K
- Light color (LMFR): White variations and colors
Product functionality in the ENKI app:
| Device functionality | Properties | Scenario integration | ||
| Actions | Triggers | Conditions | ||
| Turn on / Off | Product "ON" - "OFF" function | ✔ | ✔ | ✔ |
| Change color / Hue / Saturation | Changes the color emitted by the bulb | ✔ | ✘ | ✘ |
| Change white temperature |
White temperature: From 2200K to 6500K (Golden yellow / Light yellow / Warm white / Neutral white / Cool white / Cold white / Bright white / Brilliant white / Light blue / Cold blue) |
✔ | ✘ | ✘ |
| Change brightness level | Min: 0% / Max: 100% / Step: 1% | ✔ | ✘ | ✘ |
|
Timer function: Turn off in / Turn on in |
Set a time during the day to switch the device "OFF" or "ON" | ✘ | ✘ | ✘ |
|
Timer function: Cancel timer |
"STOP" the timer set for "Turn off in or Turn on in" |
✘ | ✘ | ✘ |
| Scheduling |
Set a start time and device state Set an end time and device state (optional) Choose execution days |
✘ | ✘ | ✘ |
|
|
|
| Control page | Settings |
Product view:
How does my device visually react in different situations?
|
Bulb in factory mode / reset, ready for pairing. Performs a white / red / green / blue cycle, then stays solid white (Not associated with any device) |
Bulb detects a signal. Flashes once when detecting the signal (Device pairing signal) |
Bulb paired. (Associated with a device) |
How to use my device without the Enki app?
You must have the Lexman lighting remote control (White) in order to control your bulb without the Enki app.
How to reset my device?