* Prerequisites for the Enki app: Internet access and a phone with minimum operating system: Android: 7 / iOS: 15

Article content:

Technical description:

Type: Connected receiver for electric heating pilot wire
Requires Enki box: Yes / ENKI Box V1
State feedback: Yes
Size: 55 mm x 120 mm x 24 mm
Maximum power of controlled device: 3680 W - 16 A
Measurement of active power consumed: in W or kW, Measurement accuracy: 1%
Features:
- Control of 6 radiator commands
- Energy consumption feedback since last power-on (in J, Wh or kWh)
- Repeater function
Connection: To be connected between mains power and radiator
Cable section: Up to 2.5 mm²
Use: Indoor only
Operating temperature: 0°C/+40°C
Storage temperature: -20°C/+70°C
Power supply: 230 Vac / 50 Hz
Average consumption: < 1W
Installation: wall-mounted, surface-mounted (anchors and screws provided)
Color: Sand / Pure white
Protection: IP20
Weight: 80g
Radio profile:
- Radio protocol: EnOcean / Profile D2-O1-OC
- Radio frequency: 868.3 MHz
- Data rate: 125 kbit/s
- Modulation: ASK
- Transmission power: +5 dBm (EIRP)
- Radio range:
  - In open field: 80m
  - Masonry: 20m, through max 3 walls
  - Reinforced concrete: 10m, through max 1 wall/ceiling
  - Drywall/Wood: 30m, through max 5 walls

Device functionality	Properties	Scenario integration
Device functionality	Properties	Actions	Triggers	Conditions
Change the target temperature mode of the thermostat	OFF / Frost protection / Eco / Comfort / Comfort -1 / Comfort -2	✔	✔	✔
Create an override	Temporarily change the equipment temperature for a given time when it is in a schedule	✘	✘	✘
Programming	Via the heating menu or individually via the control card	✘	✘	✘
Check / Retrieve electrical consumption	Via cumulative consumption and consumption history (day, week, month, year)	✘	✘	✘