* Requirements for the Enki application: Internet access and a phone with minimum operating system: Android: 7 / iOS: 15

Article content:

Technical description:

Type: Connected temperature and humidity sensor
Requires Enki box: Yes / ENKI Box V1
State feedback: Yes
Dimensions: 25 mm x 78 mm x 15 mm
Radio protocol: EnOcean
Transmission frequency: 868.3 MHz
EEP Profile: A5-04-01
Transmission power: 10 mW max.
Storage temperature: From -20°C to +60°C
Illumination: >100 lux average per day
Protection degree: IP30 on its base
Installation altitude: 2000m max.
Recommended battery (not included) [Depending on model]:
- Abnormal load current: Lithium CR1216, 3V, 25 mA/h >15 µA
- Battery life: 5 years
Temperature measurement range: from 0°C to +40°C
Temperature measurement accuracy: +/-0.5°C from +15°C to +25°C
Temperature measurement resolution: 0.16°C
Humidity measurement range: from 5 to 100%, no condensation
Humidity measurement accuracy: from 0 to 40°C +/-5% from 30% to 70%
Humidity measurement resolution: 0.4%
Theoretical product signal range:
- Masonry 20m, through maximum 3 walls
- Reinforced concrete 10m, through maximum 1 wall/ceiling
- Drywall / Wood 30m, through maximum 5 walls

Device functionality	Properties	Scenario integration
Device functionality	Properties	Actions	Triggers	Conditions
Retrieve ambient temperature	Min: 0°C / Max: 40°C / Step: 0.1°C	✘	✔	✔
Retrieve ambient humidity	Min: 0% / Max: 100% / Step: 0.1%	✘	✔	✔
Temperature history	History by "day", "week", "month" and "year"	✘	✘	✘
Humidity history	History by "day", "week", "month" and "year"	✘	✘	✘