The Enki app provides a complete interface for controlling your Noirot radiator, monitoring your consumption, and optimizing your comfort. Here are the details of the features available on your device's control screen.
From your device: visible information
1. Temperature management
On the device's main screen, you can view two essential pieces of information:
- Measured temperature : Indicates the current temperature in the room, as measured by the radiator's sensor. Note: This value is visible in the app to inform you of the actual comfort level. It is not displayed on the radiator's screen, which may explain the difference between the radiator display (the setpoint) and how you feel (the actual temperature).
- Desired temperature (setpoint) : This is the target temperature you request. To change the setpoint, use the slider or the + and - buttons. This is the temperature shown on the radiator's control screen
2. Heating indicator
A visual indicator lets you know whether the radiator is active:
- The "Heating" status is displayed when the radiator is using energy to reach the desired temperature.
- If the room temperature has been reached, the radiator automatically switches off to save energy.
- When the Enki app indicates that heating is active, a heating indicator also appears on the radiator's control screen
From Enki: How do you control the heating?
The Enki app offers four distinct modes to adapt the behavior of the heating device to your needs:
At home mode
To simplify the management of your heating on a daily basis, activate "At home" mode so that the device automatically applies the general schedule already defined in the central "Heating" section of your Enki app. To do this, include your equipment in modes and schedules so that it can follow the overall control.
Learn more:
Using a radiator from the heating tab
Equipment schedule
To adapt thermal comfort to the specific features of the room where this equipment is located, select "Equipment schedule" mode so that the device follows the individual, personalized schedule you have configured for it.
Manual mode
To adjust the temperature occasionally according to your immediate needs, switch to "Manual" mode to maintain a fixed setpoint temperature until your next change.
Frost protection mode
To safely turn off your heating during mild periods while protecting your home, set the device to "Off" mode. This will turn off the system while maintaining automatic frost protection as soon as the room temperature drops below 7°C.
Adjust the temperature and check the heating status
Adjusting the Setpoint Temperature
To set the target temperature that your heating should reach and maintain in the room, use the "Desired temperature" function by pressing the (+) and (-) buttons or by directly moving the rotary slider on the screen. This component is inactive if an override is in progress on the equipment; you must cancel the override in order to take control.
Monitoring the Measured Temperature and Heating Status (for compatible equipment)
To check the effectiveness of your installation at a glance, view the central indicator, which displays the exact room temperature as well as the flame icon. The latter is displayed only when the heating system is actively running.
Chart of measured data (for compatible equipment)
To analyze how the room temperature changes over the hours and understand the thermal behavior of your home, view the visual chart of the measured data.