How does integrating my heating systems into a schedule work? (Progressive integration method)

Summary:

This article guides you step by step through creating an effective heating automation schedule for your home 🏠, using a progressive integration method—that is, one object at a time. A concrete example, neither too simple nor too complex, will help you easily understand and apply these principles.

Legend:
Help & Advice   Alerts / Key points   Troubleshooting tip

Reminder:

⚠ This article supplements the one about how the connected radiator works in the "Heating" menu. If you have not read it yet, click the link above to discover all the features of the Heating menu. ☝️

Reminder:

The schedule organizes the operation of all the heating objects in your home 🏠, not just one radiator or one room. It applies to your entire home 🏠 to ensure overall thermal comfort.

When creating the schedule, think about your entire home 🏠, not an isolated area.

This tutorial guides you in efficiently scheduling your heating according to your needs.

You can then define a customized schedule that ensures thermal comfort while optimizing energy consumption.
Maison Enki.png

Schedule creation example:

Our home:

Maison Enki - 3 pièces.png

Here is our home 🏠. It consists of three rooms equipped with heating systems. The home 🏠 is organized as follows:

Flèche Enki 20px.png P1: The living room.

Flèche Enki 20px.png P2: The bathroom.

Flèche Enki 20px.png P3: The bedroom.

So, we have three radiators to integrate into the schedule.

How do you create the schedule 📅 for the three heating systems?

We will use the “progressive integration” 🕰️ method for a precise and detailed 7-day schedule, with each day divided into 24 hours.

You will need to determine the state of each heating object at every moment, particularly at midnight, and then note the times when these states change.

It is crucial to clearly define the schedules for each of your heating systems to optimize their efficiency and ensure suitable comfort.

Here, the schedules from Monday through Friday are identical, reflecting a work routine, while the weekend schedules differ to adapt to specific habits.

During the week, heating is reduced while you are away at work, but on weekends, it is scheduled for optimal comfort at home.

What temperatures 🌡️ are recommended in a home?

The recommended temperatures 🌡️ in a home are as follows:

Flèche Enki 20px.png For a living area: 20.0°C

Flèche Enki 20px.png For a bedroom: 18.0°C

Flèche Enki 20px.png For a bathroom: 23.0°C

During a prolonged absence from a room, it is recommended to reduce the temperature 🌡️ by 2 to 3 degrees to avoid unnecessary heating.

Creating a schedule for heating objects on paper:

P1: The living room.

  • Monday through Friday:
    Flèche Enki 20px.png At midnight, the room is at the low temperature. It begins heating at 05:30 so that it is comfortable before leaving for work, then returns to the low temperature at 07:00. The temperature rises again at 19:00 for returning from work and remains comfortable until 22:30, bedtime.
  • Saturday and Sunday:
    Flèche Enki 20px.png At midnight, the room remains at the low temperature until 08:00, wake-up time. It then remains at the high temperature until 23:00 so that it is comfortable throughout the day.

This gives us the first schedule for our living room heating object:

  00:00 05:30 07:00 08:00 19:00 22:30 23:00
Monday 18°C 20°C 18°C 20°C 18°C
Tuesday 18°C 20°C 18°C 20°C 18°C
Wednesday 18°C 20°C 18°C 20°C 18°C
Thursday 18°C 20°C 18°C 20°C 18°C
Friday 18°C 20°C 18°C 20°C 18°C
Saturday 18°C 20°C 18°C
Sunday 18°C 20°C 18°C

 

P2: The bathroom.

  • Monday through Friday:
    Flèche Enki 20px.png At midnight, the room is at the low temperature until 05:00. It then heats up to prepare for getting ready before leaving for work, and returns to the low temperature at 06:00.
  • Saturday and Sunday:
    Flèche Enki 20px.png At midnight, the room is at the low temperature until 19:00. It then heats up to prepare for getting ready in the evening, and returns to the low temperature at 20:00.

Here is the second heating schedule, for the bathroom:

  00:00 05:00 06:00 19:00 20:00
Monday 18°C 23°C 18°C
Tuesday 18°C 23°C 18°C
Wednesday 18°C 23°C 18°C
Thursday 18°C 23°C 18°C
Friday 18°C 23°C 18°C
Saturday 18°C 23°C 18°C
Sunday 18°C 23°C 18°C

 

P3: The bedroom.

  • Monday through Friday:
    Flèche Enki 20px.png At midnight, the room is at the high temperature for the night. At 05:30, it switches to the low temperature, then switches back to the high temperature at 22:00 for our return and nighttime.
  • Saturday and Sunday:
    Flèche Enki 20px.png The temperature remains high from midnight to 08:00, then low throughout the day until 22:30, before switching back to the high temperature for the night.

Here is the third heating schedule, for the bedroom:

  00:00 05:30 08:00 22:00 22:30
Monday 18°C 16°C 18°C
Tuesday 18°C 16°C 18°C
Wednesday 18°C 16°C 18°C
Thursday 18°C 16°C 18°C
Friday 18°C 16°C 18°C
Saturday 18°C 16°C 18°C
Sunday 18°C 16°C 18°C

 

Combine your heating schedules to create one schedule for all your objects.

P1 + P2: The living room and bathroom.

By combining the first two schedules, we obtain a first shared schedule for our heating objects.

You must use all the times listed in the two previous schedules:

00:00 05:00 05:30 06:00 07:00 08:00 19:00 20:00 22:30 23:00

Then compare the different states of your heating devices by combining your schedules to derive modes:

Mode 1 (M1)
P1: 18°C
P2: 18°C
Mode 2 (M2)
P1: 18°C
P2: 23°C
Mode 3 (M3)
P1: 20°C
P2: 23°C
Mode 4 (M4)
P1: 20°C
P2: 18°C

Combine the schedules for your two heating devices to create a shared schedule.

  00:00 05:00 05:30 06:00 07:00 08:00 19:00 20:00 22:30 23:00
Monday M1 M2 M3 M4 M1 M4 M1
Tuesday M1 M2 M3 M4 M1 M4 M1
Wednesday M1 M2 M3 M4 M1 M4 M1
Thursday M1 M2 M3 M4 M1 M4 M1
Friday M1 M2 M3 M4 M1 M4 M1
Saturday M1 M4 M3 M4 M1
Sunday M1 M4 M3 M4 M1

P1 + P2 + P3: The living room, bathroom, and bedroom.

Next, add the third heating object and integrate its schedule into the shared schedule already created.

Use all the times from both schedules:

00:00 05:00 05:30 06:00 07:00 08:00 19:00 20:00 22:00 22:30 23:00

Then compare the different states of your heating devices by combining your schedules to derive modes:

Mode 1 (M1)
P1: 18°C
P2: 18°C
P3: 18°C
Mode 2 (M2)
P1: 18°C
P2: 23°C
P3: 18°C
Mode 3 (M3)
P1: 20°C
P2: 23°C
P3: 16°C
Mode 4 (M4)
P1: 20°C
P2: 18°C
P3: 16°C
Mode 5 (M5)
P1: 18°C
P2: 18°C
P3: 16°C
Mode 6 (M6)
P1: 20°C
P2: 18°C
P3: 18°C

Combine the schedule for your third heating device with the shared schedule to add it:

  00:00 05:00 05:30 06:00 07:00 08:00 19:00 20:00 22:00 22:30 23:00
Monday M1 M2 M3 M4 M5 M4 M6 M1
Tuesday M1 M2 M3 M4 M5 M4 M6 M1
Wednesday M1 M2 M3 M4 M5 M4 M6 M1
Thursday M1 M2 M3 M4 M5 M4 M6 M1
Friday M1 M2 M3 M4 M5 M4 M6 M1
Saturday M1 M4 M3 M4 M6 M1
Sunday M1 M4 M3 M4 M6 M1

Let's name our modes so that we can configure them in the app before creating the schedule:

  • Night: The period when we sleep.
  • Present: When we are in the main part of the home.
  • Away: When no one is home.
  • Morning – Heat bathroom: Heating the bathroom when we wake up.
  • Bathroom + Living room: Heating the bathroom while the living room is occupied.
  • Evening – Heat bedroom: Heating the bedroom at the beginning of the evening.
Maison Enki - 3 pièces - Chauffe salon.png
 Present
P1: 20°C
P2: 18°C
P3: 16°C
Maison Enki - 3 pièces - Aucune chauffe.png
 Away
P1: 18°C
P2: 18°C
P3: 16°C
Maison Enki - 3 pièces - Chauffe chambre.png
 Night
P1: 18°C
P2: 18°C
P3: 18°C
Maison Enki - 3 pièces - Chauffe chambre et salle de bain.png
 Morning - Heat bathroom
P1: 18°C
P2: 23°C
P3: 18°C
Maison Enki - 3 pièces - Chauffe salle de bain et salon.png
 Bathroom + Living room
P1: 20°C
P2: 23°C
P3: 16°C
Maison Enki - 3 pièces - Chauffe chambre et salon.png
 Evening - Heat bedroom
P1: 20°C
P2: 18°C
P3: 18°C
Very good. Now that the schedules 🕰️ for the radiators in the schedule for the home 🏠 have been defined and we have adapted our different modes, we need to program these settings in the Enki app 📅 Logo application Enki (petit).png. This will manage the temperature according to your needs, ensuring comfort and energy savings.

How to enter this schedule in the app:

01 - Planning par intégration horaire - Mode par défaut.png

As a reminder, the system includes three default modes:

  • Present
  • Away
  • Night

These modes are essential for proper operation and cannot be deleted. However, you can customize them: change their name, choose the devices they activate, and adjust the associated rules according to your needs.
Since we know the six modes to create, let's start by creating all of them so that we have the ones needed to build the schedule.

01 - Let's start by modifying mode no. 1 (M1), "Night."

Click the mode name to edit it.

You can then:

  • Change the mode name
  • Configure the heating devices and their settings, including:
    Flèche Enki 20px.png The toggle to include the device in the mode (Curseur Off.png or Curseur On.png)
    Flèche Enki 20px.png The device state when the mode is activated.
02 - Planning par intégration horaire - Modification du mode nuit 01.gif
03 - Planning par intégration horaire - Modification du mode nuit 02.gif
Maison Enki - 3 pièces - Chauffe chambre.png
P1: 18°C
P2: 18°C
P3: 18°C
Mode: Night

02 - Let's set up the "Night" mode.

Adjust the temperature using the "+" and "-" buttons according to the schedule:

  • P1: 18.0°C
  • P2: 18.0°C
  • P3: 18.0°C

Confirm by clicking "✓" in the upper-right corner (or "Save" at the bottom on Android).

03 - To create the new mode no. 2 (M2), follow these steps:

Flèche Enki 20px.png Click "+ Add a mode."

The add page offers:

  • Name the mode (a name is required).
  • Configure the heating devices and their settings, including:
    Flèche Enki 20px.png The toggle to include the device in the mode (Curseur Off.png or Curseur On.png). Make sure the relevant heaters are selected Curseur On.png.
    Flèche Enki 20px.png The device state when the mode is activated.
08 - Planning par intégration horaire - Create à new mode 01.gif
09-PLA~1.GIF
Maison Enki - 3 pièces - Chauffe chambre et salle de bain.png
P1: 18°C
P2: 23°C
P3: 18°C
Mode: Morning - Heat bathroom

04 - Let's create our "Morning - Heat bathroom" mode for a clear name.

Set the temperatures using the "+" and "-" buttons according to the schedule:

  • P1: 18.0°C
  • P2: 23.0°C
  • P3: 18.0°C

Confirm by clicking "✓" on iOS or "Save" on Android to save your new mode.

05 - Let's create the new mode no. 3 (M3). Follow these steps:

Flèche Enki 20px.png Click "+ Add a mode."

The add page offers:

  • Name the mode (a name is required).
  • Configure the heating devices and their settings, including:
    Flèche Enki 20px.png The toggle to include the device in the mode (Curseur Off.png or Curseur On.png). Make sure the relevant heaters are selected Curseur On.png.
    Flèche Enki 20px.png The device state when the mode is activated.
13 - Planning par intégration horaire - Create à new mode 02.gif
14 - Planning par intégration horaire - Création de mode (SDB + Séjour).gif
Maison Enki - 3 pièces - Chauffe salle de bain et salon.png
P1: 20°C
P2: 23°C
P3: 16°C
Mode: Bathroom + Living Room

06 - Let's create the "Bathroom + Living Room" mode to heat these two rooms.

Set the temperatures using the "+" and "-" buttons according to the schedule:

  • P1: 20.0°C
  • P2: 23.0°C
  • P3: 16.0°C

Confirm by clicking "✓" on iOS or "Save" on Android to save your new mode.

07 - The next mode no. 4 (M4) will heat only the living room and will be used when we are present in the main living area. We will therefore modify the "Present" mode, the primary mode for being home.

Click the mode name to edit it.

You can then:

  • Change the mode name
  • Configure the heating devices and their settings, including:
    Flèche Enki 20px.png The toggle to include the device in the mode (Curseur Off.png or Curseur On.png)
    Flèche Enki 20px.png The device state when the mode is activated.
18 - Planning par intégration horaire - Modification du mode présent 01.gif
19 - Planning par intégration horaire - Modification du mode présent 02.gif
Maison Enki - 3 pièces - Chauffe salon.png
P1: 20°C
P2: 18°C
P3: 16°C
Mode: Present

08 - Let's set up the "Present" mode.

Adjust the temperature using the "+" and "-" buttons according to the schedule:

  • P1: 20.0°C
  • P2: 18.0°C
  • P3: 16.0°C

Confirm by clicking "✓" in the upper-right corner (or "Save" at the bottom on Android).

09 - The next mode no. 5 (M5) is for when no one is home. It will set all heating devices to the lowest temperature. We will therefore modify the "Away" mode, the primary mode for being away from home.

Click the mode name to edit it.

You can then:

  • Change the mode name
  • Configure the heating devices and their settings, including:
    Flèche Enki 20px.png The toggle to include the device in the mode (Curseur Off.png or Curseur On.png)
    Flèche Enki 20px.png The device state when the mode is activated.
23 - Planning par intégration horaire - Modification du mode absent 01.gif
24 - Planning par intégration horaire - Modification du mode absent 02.gif
Maison Enki - 3 pièces - Aucune chauffe.png
P1: 18°C
P2: 18°C
P3: 16°C
Mode: Away

10 - Let's set up the "Away" mode.

Set the temperatures using the "+" and "-" buttons according to the schedule:

  • P1: 18°C
  • P2: 18°C
  • P3: 16.0°C

Confirm by clicking "✓" on iOS or "Save" on Android to save your new mode.

11 - Let's create the new mode no. 6 (M6). Follow these steps:

Flèche Enki 20px.png Click "+ Add a mode."

The add page offers:

  • Name the mode (a name is required).
  • Configure the heating devices and their settings, including:
    Flèche Enki 20px.png The toggle to include the device in the mode (Curseur Off.png or Curseur On.png). Make sure the relevant heaters are selected Curseur On.png.
    Flèche Enki 20px.png The device state when the mode is activated.
29 - Planning par intégration horaire - Create à new mode 03.gif
30-PLA~1.GIF
Maison Enki - 3 pièces - Chauffe chambre et salon.png
  10:00 PM
P1: 20°C
P2: 18°C
P3: 18°C
Mode: Evening - Heat bedroom

12 - Let's create our "Evening - Heat bedroom" mode for a clear name.

Set the temperatures using the "+" and "-" buttons according to the schedule:

  • P1: 20.0°C
  • P2: 18.0°C
  • P3: 18.0°C

Confirm by clicking "✓" on iOS or "Save" on Android to save your new mode.

Now that all our modes are defined, let's create our schedule. 📅 A default schedule is available and can be modified according to your needs.

To create a new schedule 📅:

Flèche Enki 20px.png Click "+ Add a schedule" below the default schedule.

Flèche Enki 20px.png Choose between "Simple setup" with a wizard, or "Manual setup" for a more detailed schedule.

Example: here, we will modify the default schedule.

13 - To modify the default schedule, follow these steps:

  1. Click the "Default schedule" tile to open the schedule.
  2. Start by editing Monday by clicking the "Monday" tile to access its settings.
01 - Planning par intégration totale - Accès planning par défaut.gif
02 - Planning par intégration totale - Nettoyer planning par défaut.gif

14 - We will reset the day of Monday by deleting all saved modes, as we would for a new schedule.

  1. Select a mode to delete.
  2. Click "Delete" at the bottom of the screen.
  3. Repeat for each mode.

After deletion, only one mode named "Away" should remain, corresponding to the default setting.

15 - We will start by adding the modified "Night" mode:

  1. Click the "Away" mode (12:00 AM to 11:59 PM).
  2. Select the configured "Night" mode.
  3. Confirm with "✓" on iOS or "Confirm" on Android.

The schedule therefore starts with Night mode at 12:00 AM.
03 - Planning par intégration totale - Ajouter mode 01.gif
 
Maison Enki - 3 pièces - Chauffe chambre.png
  12:00 AM
P1: 18°C
P2: 18°C
P3: 18°C
Mode: Night
04 - Planning par intégration totale - Ajouter mode 02.gif

16 - Let's continue by adding the "Morning - Heat bathroom" mode. Here's how:

  1. Click "+ Add a time slot" below the "Night" mode.
  2. Set "Start time" to 05:00 AM, then confirm.
  3. Set "End time" to 05:30 AM, then confirm.
  4. Select the "Morning - Heat bathroom" mode.
  5. Click "✓" on iOS or "Confirm" on Android.

The "Night" mode remains scheduled from 12:00 AM to 5:00 AM, resumes after 5:30 AM, and continues until the end of the day. This setup is temporary until other modes are added.
 
Maison Enki - 3 pièces - Chauffe chambre.png
Maison Enki - 3 pièces - Chauffe chambre et salle de bain.png
Maison Enki - 3 pièces - Chauffe chambre.png
  12:00 AM 5:00 AM 5:30 AM
P1: 18°C 18°C 18°C
P2: 18°C 23°C 18°C
P3: 18°C 18°C 18°C
Mode: Night Morning - Heat bathroom Night

17 - Let's continue by adding the "Bathroom + Living Room" mode. Here's how:

  1. Click "+ Add a time slot" below the "Night" mode.
  2. Set "Start time" to 05:30 AM, then confirm.
  3. Set "End time" to 06:00 AM, then confirm.
  4. Select the "Bathroom + Living Room" mode.
  5. Click "✓" on iOS or "Confirm" on Android.

The "Night" mode is active from 12:00 AM to 5:00 AM, followed by "Morning - Heat bathroom" until 5:30 AM, then "Bathroom + Living Room" until 6:00 AM. The "Night" mode then resumes until the end of the day. This setup is temporary until other modes are added.
05 - Planning par intégration totale - Ajouter mode 03.gif
 
Maison Enki - 3 pièces - Chauffe chambre.png
Maison Enki - 3 pièces - Chauffe chambre et salle de bain.png
Maison Enki - 3 pièces - Chauffe salle de bain et salon.png
Maison Enki - 3 pièces - Chauffe chambre.png
  12:00 AM 5:00 AM 5:30 AM 6:00 AM
P1: 18°C 18°C 20°C 18°C
P2: 18°C 23°C 23°C 18°C
P3: 18°C 18°C 16°C 18°C
Mode: Night Morning - Heat bathroom Bathroom + Living Room Night
06 - Planning par intégration totale - Ajouter mode 04.gif

18 - Let's continue by adding the "Present" mode. Here's how:

  1. Click "+ Add a time slot" below the "Night" mode.
  2. Set "Start time" to 06:00 AM, then confirm.
  3. Set "End time" to 07:00 AM, then confirm.
  4. Select the "Present" mode.
  5. Click "✓" on iOS or "Confirm" on Android.

The "Night" mode is active from 12:00 AM to 5:00 AM, followed by "Morning - Heat bathroom" until 5:30 AM, then "Bathroom + Living Room" until 6:00 AM. The "Present" mode then continues until 7:00 AM, and the "Night" mode resumes until the end of the day. This setup is temporary until other modes are added.
 
Maison Enki - 3 pièces - Chauffe chambre.png
Maison Enki - 3 pièces - Chauffe chambre et salle de bain.png
Maison Enki - 3 pièces - Chauffe salle de bain et salon.png
Maison Enki - 3 pièces - Chauffe salon.png
Maison Enki - 3 pièces - Chauffe chambre.png
  12:00 AM 5:00 AM 5:30 AM 6:00 AM 7:00 AM
P1: 18°C 18°C 20°C 20°C 18°C
P2: 18°C 23°C 23°C 18°C 18°C
P3: 18°C 18°C 16°C 16°C 18°C
Mode: Night Morning - Heat bathroom Bathroom + Living Room Present Night

19 - Let's continue by adding the "Away" mode. Here's how:

  1. Click "+ Add a time slot" below the "Night" mode.
  2. Set "Start time" to 07:00 AM, then confirm.
  3. Set "End time" to 07:00 PM, then confirm.
  4. Select the "Away" mode.
  5. Click "✓" on iOS or "Confirm" on Android.

The "Night" mode is active from 12:00 AM to 5:00 AM, followed by "Morning - Heat bathroom" until 5:30 AM, then "Bathroom + Living Room" until 6:00 AM. Next, "Present" lasts until 7:00 AM, followed by "Away" from 7:00 AM to 7:00 PM, before "Night" resumes until midnight. This setup is temporary until other modes are added.
07 - Planning par intégration totale - Ajouter mode 05.gif
 
Maison Enki - 3 pièces - Chauffe chambre.png
Maison Enki - 3 pièces - Chauffe chambre et salle de bain.png
Maison Enki - 3 pièces - Chauffe salle de bain et salon.png
Maison Enki - 3 pièces - Chauffe salon.png
Maison Enki - 3 pièces - Aucune chauffe.png
Maison Enki - 3 pièces - Chauffe chambre.png
  12:00 AM 5:00 AM 5:30 AM 6:00 AM 7:00 AM 7:00 PM
P1: 18°C 18°C 20°C 20°C 18°C 18°C
P2: 18°C 23°C 23°C 18°C 18°C 18°C
P3: 18°C 18°C 16°C 16°C 16°C 18°C
Mode: Night Morning - Heat bathroom Bathroom + Living Room Present Away Night
08 - Planning par intégration totale - Ajouter mode 06.gif

 

20 - Let's continue by adding the "Present" mode again. Here's how:

  1. Click "+ Add a time slot" below the "Night" mode.
  2. Set "Start time" to 7:00 PM, then confirm.
  3. Set "End time" to 10:00 PM, then confirm.
  4. Select the "Present" mode.
  5. Click "✓" on iOS or "Confirm" on Android.

The Night mode is active from 12:00 AM to 5:00 AM, followed by Morning - Heat bathroom until 5:30 AM, then Bathroom + Living Room until 6:00 AM. Next, Present continues until 7:00 AM, Away from 7:00 AM to 7:00 PM, then Present until 10:00 PM before Night resumes until midnight. This setup is temporary while waiting for other modes.
 
Maison Enki - 3 pièces - Chauffe chambre.png
Maison Enki - 3 pièces - Chauffe chambre et salle de bain.png
Maison Enki - 3 pièces - Chauffe salle de bain et salon.png
Maison Enki - 3 pièces - Chauffe salon.png
Maison Enki - 3 pièces - Aucune chauffe.png
Maison Enki - 3 pièces - Chauffe salon.png
Maison Enki - 3 pièces - Chauffe chambre.png
  12:00 AM 5:00 AM 5:30 AM 6:00 AM 7:00 AM 7:00 PM 10:00 PM
P1: 18°C 18°C 20°C 20°C 18°C 20°C 18°C
P2: 18°C 23°C 23°C 18°C 18°C 18°C 18°C
P3: 18°C 18°C 16°C 16°C 16°C 16°C 18°C
Mode: Night Morning - Heat bathroom Bathroom + Living Room Present Away Present Night

21 - Let's continue by adding the "Evening - Heat bedroom" mode. Here's how:

  1. Click "+ Add a time slot" below the "Night" mode.
  2. Set "Start time" to 10:00 PM, then confirm.
  3. Set "End time" to 10:30 PM, then confirm.
  4. Select the "Evening - Heat bedroom" mode.
  5. Click "✓" on iOS or "Confirm" on Android.

The Night mode is active from 12:00 AM to 5:00 AM, followed by Morning - Heat bathroom until 5:30 AM, then Bathroom + Living Room until 6:00 AM. Next, Present continues until 7:00 AM, Away from 7:00 AM to 7:00 PM, then Present until 10:00 PM, followed by Evening - Heat bedroom until 10:30 PM, before Night resumes until midnight.
32 - Planning par intégration horaire - Ajouter mode 07.gif

Our organization for Monday is now complete. As mentioned at the beginning, here are the details we planned for this day: 

Schéma planning - Semaine.png
   The room is at a low temperature
   The room is at a high temperature
 
Maison Enki - 3 pièces - Chauffe chambre.png
Maison Enki - 3 pièces - Chauffe chambre et salle de bain.png
Maison Enki - 3 pièces - Chauffe salle de bain et salon.png
Maison Enki - 3 pièces - Chauffe salon.png
Maison Enki - 3 pièces - Aucune chauffe.png
Maison Enki - 3 pièces - Chauffe salon.png
Maison Enki - 3 pièces - Chauffe chambre et salon.png
Maison Enki - 3 pièces - Chauffe chambre.png
  12:00 AM 5:00 AM 5:30 AM 6:00 AM 7:00 AM 7:00 PM 10:00 PM 10:30 PM
P1: 18°C 18°C 20°C 20°C 18°C 20°C 20°C 18°C
P2: 18°C 23°C 23°C 18°C 18°C 18°C 18°C 18°C
P3: 18°C 18°C 16°C 16°C 16°C 16°C 18°C 18°C
Mode: Night Morning - Heat bathroom Bathroom + Living Room Present Away Present Evening - Heat bedroom Night
33 - Planning par intégration horaire - Dupliquer du mardi au vendredi.gif

22 - This Monday schedule must be applied through Friday. To do this, duplicate it from Tuesday through Friday:

  1. Click "Apply to other days."
  2. Select the relevant days (Tuesday through Friday).
  3. Click "✓" on iOS or "Save" on Android.
  4. Return to the main schedule with "←" in the upper-left corner and verify that the copy was completed successfully.

This feature makes it easy to duplicate one day's schedule to other days.

⚠ You can only copy your day to this 7-day schedule, not to other schedules.
After the week, you need to focus on designing the weekend. As with the week, you need to determine the status of each radiator at 12:00 AM, then at each specific time 🕰️ when a radiator changes status.
23 - Go to the first day of the weekend by clicking Saturday in the list of days in your schedule.
34 - Planning par intégration horaire - Accès planning par défaut (Samedi).gif
35 - Planning par intégration horaire - Nettoyer planning par défaut (Samedi).gif

24 - We will reset Saturday by deleting all saved modes, as we would for a new schedule.

  1. Select a mode to delete.
  2. Click "Delete" at the bottom of the screen.
  3. Repeat for each mode.

After deletion, only one mode named "Away" should remain, corresponding to the default setting.

25 - Let's begin the integration by including the "Night" mode:

  1. Click the "Away" mode (12:00 AM to 11:59 PM).
  2. Select the "Night" mode.
  3. Confirm with "✓" on iOS or "Confirm" on Android.

The schedule therefore starts with night mode at 12:00 AM
36 - Planning par intégration horaire - Ajouter mode 01 (Samedi).gif
 
Maison Enki - 3 pièces - Chauffe chambre.png
  12:00 AM
P1: 18°C
P2: 18°C
P3: 18°C
Mode: Night
37 - Planning par intégration horaire - Ajouter mode 02 (Samedi).gif

26 - Let's continue our integration by adding the "Home" mode:

  1. Click "+ Add a time slot" under the "Night" mode.
  2. The start time is already set to 8:00 AM, so there is no need to adjust the start time slot.
  3. Set "End time" to 7:00 PM, then confirm.
  4. Select the "Home" mode.
  5. Click "✓" on iOS or "Confirm" on Android.

The "Night" mode is active from 12:00 AM to 8:00 AM, then from 7:00 PM to midnight. The "Home" mode runs from 8:00 AM to 7:00 PM. This configuration is temporary while waiting to add other modes.
 
Maison Enki - 3 pièces - Chauffe chambre.png
Maison Enki - 3 pièces - Chauffe salon.png
Maison Enki - 3 pièces - Chauffe chambre.png
  12:00 AM 8:00 AM 7:00 PM
P1: 18°C 20°C 18°C
P2: 18°C 18°C 18°C
P3: 18°C 16°C 18°C
Mode: Night Home Night

27 - Let's continue our integration by adding the "Bathroom + Living room" mode:

  1. Click "+ Add a time slot" under the "Night" mode.
  2. Set 'Start time" to 7:00 PM, then confirm.
  3. Set "End time" to 8:00 PM, then confirm.
  4. Select the "Bathroom + Living room" mode.
  5. Click "✓" on iOS or "Confirm" on Android.

The "Night" mode is active from 12:00 AM to 8:00 AM and from 8:00 PM to midnight. The "Home" mode runs from 8:00 AM to 7:00 PM, and "Bathroom + Living room" from 7:00 PM to 8:00 PM. This configuration is temporary while waiting for other modes.
38 - Planning par intégration horaire - Ajouter mode 03 (Samedi).gif
 
Maison Enki - 3 pièces - Chauffe chambre.png
Maison Enki - 3 pièces - Chauffe salon.png
 Maison Enki - 3 pièces - Chauffe salle de bain et salon.png
Maison Enki - 3 pièces - Chauffe chambre.png
  12:00 AM 8:00 AM 7:00 PM 8:00 PM
P1: 18°C 20°C 20°C 18°C
P2: 18°C 18°C 23°C 18°C
P3: 18°C 16°C 16°C 18°C
Mode: Night Home Bathroom + Living room Night
39 - Planning par intégration horaire - Ajouter mode 04 (Samedi).gif

28 - Let's continue our integration by adding the "Home" mode again:

  1. Click "+ Add a time slot" under the "Night" mode.
  2. Set 'Start time" to 8:00 PM, then confirm.
  3. Set "End time" to 10:30 PM, then confirm.
  4. Select the "Home" mode.
  5. Click "✓" on iOS or "Confirm" on Android.

The "Night" mode is active from 12:00 AM to 8:00 AM and from 10:30 PM to midnight. The "Home" mode runs from 8:00 AM to 7:00 PM and from 8:00 PM to 10:30 PM. The "Bathroom + Living room" mode is active from 7:00 PM to 8:00 PM. This configuration is temporary while waiting to add other modes.
 
Maison Enki - 3 pièces - Chauffe chambre.png
Maison Enki - 3 pièces - Chauffe salon.png
 Maison Enki - 3 pièces - Chauffe salle de bain et salon.png
Maison Enki - 3 pièces - Chauffe salon.png
Maison Enki - 3 pièces - Chauffe chambre.png
  12:00 AM 8:00 AM 7:00 PM 8:00 PM 10:30 PM
P1: 18°C 20°C 20°C 20°C 18°C
P2: 18°C 18°C 23°C 18°C 18°C
P3: 18°C 16°C 16°C 16°C 18°C
Mode: Night Home Bathroom + Living room Home Night

29 - Let's complete our integration by adding the "Evening - Heat the bedroom" mode:

  1. Click "+ Add a time slot" under the "Night" mode.
  2. Set 'Start time" to 10:30 PM, then confirm.
  3. Set "End time" to 11:00 PM, then confirm.
  4. Select the "Evening - Heat the bedroom" mode.
  5. Click "✓" on iOS or "Confirm" on Android.

The "Night" mode is active from 12:00 AM to 8:00 AM and from 11:00 PM to midnight. The "Home" mode runs from 8:00 AM to 7:00 PM and from 8:00 PM to 10:30 PM. The "Bathroom + Living room" mode is active from 7:00 PM to 8:00 PM, and the "Evening - Heat the bedroom" mode from 10:30 PM to 11:00 PM.
40 - Planning par intégration horaire - Ajouter mode 05 (Samedi).gif

Our organization for Saturday is now complete. As we mentioned at the beginning, here are the details we planned for this day: 

Schéma planning - Week-end.png
   The room is at a low temperature
   The room is at a high temperature
 
Maison Enki - 3 pièces - Chauffe chambre.png
Maison Enki - 3 pièces - Chauffe salon.png
 Maison Enki - 3 pièces - Chauffe salle de bain et salon.png
Maison Enki - 3 pièces - Chauffe salon.png
Maison Enki - 3 pièces - Chauffe chambre et salon.png
Maison Enki - 3 pièces - Chauffe chambre.png
  12:00 AM 8:00 AM 7:00 PM 8:00 PM 10:30 PM 11:00 PM
P1: 18°C 20°C 20°C 20°C 20°C 18°C
P2: 18°C 18°C 23°C 18°C 18°C 18°C
P3: 18°C 16°C 16°C 16°C 18°C 18°C
Mode: Night Home Bathroom + Living room Home Evening - Heat the bedroom Night
41 - Planning par intégration horaire - Dupliquer le samedi au dimanche.gif

 

30 - This Saturday schedule must also be applied to Sunday. To do this, duplicate it for Sunday:

  1. Click "Apply to other days".
  2. Select the days concerned (Sunday).
  3. Click "✓" on iOS or "Save" on Android.
  4. Return to the general schedule with "←" in the upper-left corner and verify that the copy was completed correctly.

This feature makes it easy to duplicate a day's schedule to other days.

⚠ You can only copy your day within this 7-day schedule, not to other schedules.
The schedule is complete; simply save it to apply it to your heaters.

31 - To save your schedule:

  1. Click "✓" (iOS) or "Save" (Android).
  2. Click "←" in the upper-left corner to return to the heating menu.
42 - Planning par intégration horaire - Sauvegarder le planning par défaut.gif
43 - Planning par intégration horaire - Activer le mode planning.gif

32 - To activate your newly created schedule, you must:

  1. Click "Change" on the "Control type" tile.
  2. Select the "Schedule" control.
  3. Click "✓" (iOS) or "Save" (Android).

Things to know about schedules:

  • How many setpoint changes are allowed per day?
    Flèche Enki 20px.png You can modify the schedule up to 20 times per day.
09 - Comment fonctionne un planning individuel - Message d'erreur - Nombre de plage supérieur à 20.png

When editing your schedule, you can exceed 20 time slots, but when saving, an error message appears:

  • "At least one of the days in your schedule exceeds the limit of 20 time slots"

You must therefore reduce the number to a maximum of 20 time slots per day to save.
  • How do I delete a schedule?
    Flèche Enki 20px.png Delete it from its editing screen.

01 - In the Heating menu, click the settings "" in the upper-right corner.

02 - Choose the schedule to delete.

03 - Scroll down, click "Delete" and confirm again by clicking "Delete".

The schedule will be deleted and you will return to the modes and schedules.
44 - Planning par intégration horaire - Supprimer un planning.gif

⚠ An active schedule cannot be deleted. The following message is displayed:

  • “You cannot delete this schedule because it is currently running.”

To delete it, change the schedule being used or switch it to another mode.
45 - Planning par intégration horaire - Supprimer un planning (Erreur).gif

  • Can I give multiple schedules the same name?
    Flèche Enki 20px.png No, each schedule must have a unique name.

  • What temperatures are recommended?
    Flèche Enki 20px.png In a home:
          - Living area: 20.0°C
          - Bedroom: 18.0°C
          - Bathroom: 23.0°C
    It is recommended to lower the temperature by 2 to 3°C in an unoccupied room.

  • Why can't the “Default” schedule be deleted?
    Flèche Enki 20px.png A schedule is required. “Default” cannot be deleted or renamed, but its times and setpoints can be modified.
  • How do I know if my device follows a schedule?
    Flèche Enki 20px.png See the following methods:
N2 - Objet - Mode planning.png
Consigne chauffage dans le menu chauffauge (Planning).gif

From your device's control page:

Check the control type and make sure that schedule mode is enabled.

Through the heating menu:

Check the status of your devices: schedule, manual, frost protection, off, or individual.
  • Can I add a schedule to my favorites ?
    Flèche Enki 20px.png No, schedules do not have a favorites system.
  • Are new heaters added to the schedule?
    Flèche Enki 20px.png Yes, they are present but disabled by default in all available modes. For each mode, enable them and configure their setpoint.
  • Can I create multiple Away modes with different temperatures?
    Flèche Enki 20px.png Yes. Each mode must have a different name and can use a distinct temperature.
  • Why doesn't my radiator turn off?
    Flèche Enki 20px.png Some heaters cannot be turned off completely. They then switch to the minimum temperature or frost protection mode.
  • How long does schedule synchronization take?
    Flèche Enki 20px.png It can take up to 15 minutes depending on the number of modes and devices involved. The more complex the schedule, the longer synchronization takes.
  • Can I copy a day's configuration to another schedule?
    Flèche Enki 20px.png No. You must recreate it manually in the other schedule.
  • How do I change schedules?
    Flèche Enki 20px.png In schedule mode, tap "⁝" on the “Current schedule” tile, then tap “Change schedule.” Select the desired schedule, then tap "✓" in the upper-right corner or "Save" at the bottom of the screen on Android.
  • Why does one of my radiators, configured to remain under individual control, automatically switch to “Home” control mode and follow the collective schedule setpoints instead of its individual schedule?
    Flèche Enki 20px.png Even if its control type is set to “Individual control,” if it is included in one of the modes, it will automatically switch to “Home” control mode when that mode is applied. Please check that your heating equipment, which is intended to be controlled individually, is excluded from all existing modes. When it is excluded, its slider appears gray in the relevant mode.

For any questions about your schedules, contact our technical support. Please specify:

  • The make and model of your phones or tablets.

  • The devices and their names in the app that you want to apply to a schedule.

  • A clear description of your request.

The more details you provide, the better we can help you.

Related articles

Submit a request